Helmet Goggles High Speed Particle Impact Testing Machine

• 

Main Purpose

To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.

Applicable Standards

SNELL SA/K2010. EN 166. EN 168. ANSI Z87.1. MIL - PRF - 32432

Technical Parameters

1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm

2. impact speed: 140~170m/s (adjustable);

3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);

4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;

5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;

6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;

7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;

8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.

Другие товары поставщика

	Plate thermal conductivity tester	Introduction:Plate thermal conductivity tester isused to test the thermal conductivity of refractory insulation, ceramic fiber, felt, textile, plat...
	Rapid crack growth testing machine	Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid c...
	Automatic cotton patting machine	Clapping machine is simple, safe and easy to operate. It adopts artificial beating mode. It uses the principle of multiple sets of connecting rods ...
	Heel impact fatigue testing machine	Main uses: Heel impact fatigue testing machine is mainly used to test the continuous impact tolerance index of women's high heels, mid-heels and o...
	Nonwovens Synthetic Blood Penetration Tester	QinsuSynthetic Blood Penetration Resistance Tester is developed for ranking the synthetic blood penetration resistance performance of medical face ...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...