Helmet Goggles High Speed Particle Impact Testing Machine
Main Purpose
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Applicable Standards
SNELL SA/K2010. EN 166. EN 168. ANSI Z87.1. MIL - PRF - 32432
Technical Parameters
1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm
2. impact speed: 140~170m/s (adjustable);
3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);
4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;
5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;
6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;
7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;
8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.
在线联系供应商
Other supplier products
 |
Intervertebral Fusion Cages Torsion Fatigue Tester | Standard YY/T 0959-2014 (China): Specifies torsional fatigue testing protocols for intervertebral fusion devices, including load ratios, frequen... |
 |
Auto - ignition Point Tester for Liquids | Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(200... |
 |
Protective Clothing Thermal Conductivity Tester | Applicable Standards: ISO 11092:2014 ASTM D1518-17 ASTM F1868 ISO 5085-1 ISO 9920 The protective clothing thermal conductivity tester is a pro... |
 |
KES - FB3 - A Compression Tester | Content TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by artisans and professionals when judging a... |
 |
Scrub Abrasion and Washability Tester | Main uses: Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of materials in dry and wet sand abrasive... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
