Tibial Tray Fatigue Testing Machine

• 

Standard

• YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection of plastic bearing surfaces.
• ASTM F1800 (International): Defines methodologies for evaluating the fatigue strength of tibial components under cantilever loading conditions.
• ISO 14879-1: Additional compliance for general fatigue testing of total knee joint prostheses.

Product Advantages

1. Cantilever Loading Precision: Advanced actuator design ensures uniform stress distribution per ASTM F1800 requirements.
2. 5 Million Cycle Endurance: Proven capability to complete YY/T 0810’s 5×10⁶-cycle fatigue test without calibration drift.
3. Dynamic Load Control: Closed-loop system maintains R=0.1 stress ratio during sinusoidal/random loading (0.1–10 Hz).
4. Real-Time Fracture Detection: AI-powered acoustic emission monitoring identifies micro-cracks at sub-millisecond intervals.
5. Intuitive Workflow: 21.5” capacitive touchscreen with gesture control and pre-loaded SOPs for 10+ implant geometries.
6. Modular Environmental Chambers: Quick-swap pods for simulated physiological (-20°C to +50°C) and corrosive environment testing.

Product Features

• Electromagnetic Actuator: 3,000 N peak force capacity with programmable load ratios (R=0.1–10).
• Cantilever Loading System: Simulates physiological knee joint moments with ±20 mm axial displacement.
• Dynamic Load Control: 0.1–10 Hz frequency range with programmable waveforms (sine, square, random, custom).
• Thermal-Mechanical Chamber: ±0.3°C temperature stability with integrated humidity control (10–95% RH).
• High-Speed Imaging Ready: Syncs with external cameras for full-field strain mapping (DIC optional upgrade).
• Safety First: Triple-redundant emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Accessories

1. Tibial Tray Test Fixture Kit:
   • Self-centering collet system (28–40 mm tibial tray compatibility)
   • Laser-aligned loading anvils with diamond-like carbon (DLC) coating
2. Thermal-Mechanical Chamber:
   • 15L capacity with rapid cooling/heating (15°C/min)
   • 316L stainless steel interior with HEPA filtration
3. TestMaster Ultimate Software:
   • Automated S-N curve generation and fatigue limit calculation
   • 21 CFR Part 11-compliant audit trail with blockchain timestamping
   • Remote monitoring via dedicated iOS/Android app
4. Operator Kit:
   • Calibrated torque wrench set (0.5–50 Nm)
   • Specimen alignment gauges (ASTM F1800 compliant)
5. Calibration Bundle:
   • NIST-traceable force calibration weights
   • Temperature/humidity verification probe
6. Safety Kit:
   • Laser safety curtains
   • Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Mask Air Exchange Pressure Difference Tester	Standards: YY 0469-2011 YY/T0969-2013 EN 14683:2014 Annex C ASTM F2100 Applications: Medical face mask differential pressure tester also c...
	5kN Universal Testing Machine ISO13934-1 ASTM D5587	This series of testing machines realizes the automatic control of the test process, data acquisition and analysis through the computer, and realize...
	Microbial Barrier Tester	Product Introduction: Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting ...
	PV Backsheet Abrasion Tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a...
	KES - F8 Air Permeability Tester	Content The Air Permeability Tester is designed to quickly and accurately measure the breathability and permeability of a wide range of samples,...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...