Total Knee Joint Prostheses Wear Tester
Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Все товары поставщика
Все товары поставщика
Standard
- ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and environmental conditions.
- ISO 14243-3:2014: Defines protocols for simulating physiological loading, displacement, and rotation during knee joint wear testing.
- ASTM F3297-18: Additional compliance for advanced testing scenarios including high-flexion and pivot-shift motions.
Product Advantages
- Hexapod Motion Control: 6-DOF kinematic simulation replicates natural knee motion (flexion/extension ±120°, AP displacement ±15 mm, tibial rotation ±20°).
- Dynamic Load Management: Dual-axis load control (axial 0–3,000 N, shear 0–500 N) with 0.1% force accuracy.
- Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with 20±2 g/L protein concentration.
- Extended Durability: Capable of 10+ million cycle testing with <0.3% drift in calibration.
- Automated Compliance: Pre-programmed ISO/ASTM test protocols with real-time data validation.
- Modular Design: Four-station configuration allows parallel testing of multiple specimens.
Product Features
- Electrohydraulic Actuation: Six independent servo-hydraulic actuators for precise motion control.
- 6-Axis Force/Torque Sensors: Measure axial forces, shear forces, and torsional moments simultaneously.
- Temperature-Controlled Bath: Recirculating lubrication system with protein skimmer and pH monitoring.
- High-Resolution Imaging: Optional integration with micro-CT systems for in-situ wear analysis.
- AI-Powered Analytics: Machine learning algorithms predict wear rates from initial test cycles.
- Safety System: Emergency stop, over-pressure relief, and laser-based specimen breakage detection.
Technical Parameters
| Parameter | Specification |
|---|---|
| Flexion/Extension Range | ±120° (0.01° resolution) |
| AP Displacement | ±15 mm (1 μm resolution) |
| Tibial Rotation | ±20° (0.01° resolution) |
| Max. Axial Force | ±3,000 N (500 N resolution) |
| Max. Shear Force | ±500 N (100 N resolution) |
| Load Control Accuracy | ±0.5% of reading (0–3,000 N) |
| Frequency Range | 0.1–5 Hz (programmable waveforms) |
| Temperature Control | 37±1°C (PT1000 sensors) |
| Lubrication System | 10L capacity with protein skimmer and bubble trap |
| Data Acquisition | 100 kHz sampling rate (16-bit resolution) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 2,500W |
| Dimensions (W×D×H) | 1,800 × 1,200 × 2,000 mm |
| Weight | 950 kg (including bath and control cabinet) |
| Noise Level | <65 dB (A-weighted) |
Accessories
- Knee Simulator Fixture Kit:
- Self-centering femoral/tibial component adapters (28–40 mm)
- Patella-femoral contact jigs (30°–60° Q-angle adjustability)
- Biorelevant Bath System:
- 10L capacity with recirculation pump and protein skimmer
- 316L stainless steel construction with HEPA filtration
- WearMaster Pro Software:
- Automated wear rate calculation (mass loss/volume displacement)
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (1–50 Nm)
- Specimen alignment gauges (ISO 14243-1 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- Angular encoder verification tool
- Safety Kit:
- Laser safety curtains
- Acoustic enclosure with 30 dB noise reduction
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Flash Measurement Instrument | Product Introduction: VMO series flash measuring instrument is mainly used to measure the plane size, such as precision workpiece, stamping parts,... |
 |
PV Backsheet Abrasion Tester/Coating scratch tester for solar panels/ Solar panel backsheet scratch hardness tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a... |
 |
E-bike chassis dynamometer testing machine | Meet the standard: EN 15194 ISO 4210 UL 2849 Product Introduction: Electric bicycles are complex systems involving mechanical, electrical, a... |
 |
Automatic Z-axis Vision Measuring Machine | Product Introduction: The Z-axis automatic image measuring instrument can efficiently detect the wheel corridors and surface shapes of various com... |
 |
Helmet Surface Protrusion Shear and Friction Tester/ helmet surface friction testing machine/ Helmet surface protrusion shear tester | In the realm of protective headgear, a helmet's primary role is to absorb and deflect impact forces to safeguard the wearer's head. However, the ex... |
Похожие товары
 |
KL‑016A Benchtop High‑precision pH Meter | Продавец: Келийлонг Электронные Акционерные Компании | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Продавец: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Продавец: Коллирон электроникс лимитед | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Продавец: Коллирон электроникс лимитед | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Продавец: Коллирон электроникс лимитед | Range EC ～19.9mS TDS Temp 0～50℃ R... |
