Total Hip Joint Prostheses Wear Tester

• 

Standard

• YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and environmental conditions.
• ISO 14242-1:2014 (International): Defines protocols for simulating physiological loading and kinematics during hip joint wear testing.
• ASTM F3047M-15: Additional compliance for advanced testing scenarios including edge loading and micro-separation.

Product Advantages

1. Triaxial Motion Simulation: Replicates full physiological motion profiles (flexion/extension ±100°, abduction/adduction ±30°, internal/external rotation ±40°).
2. Dynamic Load Control: Dual-peak loading up to 4,500 N with 0.1% force accuracy.
3. Biorelevant Environment: Temperature-controlled (37±2°C) lubrication bath with 30±2 g/L protein concentration.
4. Extended Durability: Capable of 5+ million cycle testing with <0.5% drift in calibration.
5. Automated Compliance: Pre-programmed ISO/YYT test protocols with real-time data validation.
6. Modular Design: Six-station configuration allows parallel testing of multiple specimens.

Product Features

• Electrohydraulic Actuation: Six independent servo-hydraulic actuators for precise motion control.
• 3D Force/Torque Sensors: Multi-axis sensors measure axial forces and torsional moments simultaneously.
• Temperature-Controlled Bath: Recirculating lubrication system with protein concentration monitoring.
• High-Resolution Imaging: Optional integration with micro-CT systems for in-situ wear analysis.
• AI-Powered Analytics: Machine learning algorithms predict wear rates from initial test cycles.
• Safety System: Emergency stop, over-pressure relief, and laser-based specimen breakage detection.

Technical Parameters

Standard Accessories

1. Hip Simulator Fixture Kit:
   • Self-centering femoral head adapters (16–32 mm)
   • Acetabular cup positioning jigs (60° inclination standard)
2. Biorelevant Bath System:
   • 15L capacity with recirculation pump and protein skimmer
   • 316L stainless steel construction with HEPA filtration
3. WearMaster Pro Software:
   • Automated wear rate calculation (mass loss/volume displacement)
   • 21 CFR Part 11-compliant audit trail with blockchain timestamping
   • Remote monitoring via iOS/Android app
4. Operator Kit:
   • Calibrated torque wrench set (1–50 Nm)
   • Specimen alignment gauges (ISO 14242-1 compliant)
5. Calibration Bundle:
   • NIST-traceable force calibration weights
   • Angular encoder verification tool
6. Safety Kit:
   • Laser safety curtains
   • Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Conveyor needle detector	Conveyor needle detector - Textile and Apparel - standard Applications: It is applicable to detect broken needle and iron matters inmany indust...
	Tester for Shear Force and Friction of Protrusions on Helmet Surface	Tester for Shear Force and Friction of Protrusions on Helmet Surface - Material and Parts of Automotive - standard Standards: ECE R22.06, GB811...
	Textile Air Permeability Tester	Meet the standard: ASTM D737 ISO 9237 EDANA WSP 070.1 JIS L1096 Product Introduction: Air permeability is defined as the volume of air that...
	Face Mask Tensile Testing Machine	Standards: ISO13934-1,13934-2,13935-1,13935-2,13936-1,13936-2,13936-3,13937-2,13937-3,13937-4,1421, 2411, 2062, 4674-1,5082, 9073.3, 9073.4, 907...
	Anti Synthetic blood penetration tester	Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...