Spinal Internal Fixation System Component Testing Machine

• 

Standard

• YY/T 0119-2014 (China): Specifies mechanical testing protocols for spinal fixation components, including screws, plates, rods, and connectors.
• ASTM F2193-18 (International): Defines methodologies for evaluating the static and fatigue performance of spinal implant constructs.
• ISO 12189-1: Additional compliance for mechanical testing of spinal implant components under physiological loading.

Product Advantages

1. Universal Testing Compatibility: Modular design accommodates screws (3.5–7.5 mm), plates (20–100 mm length), and rods (4.5–6.5 mm diameter).
2. Multi-Axis Loading: Simultaneous axial/torsional/shear loading replicates complex in vivo stresses.
3. High-Frequency Stability: 0.1–15 Hz dynamic control with ±0.05% force accuracy.
4. Biorelevant Environment: Temperature-controlled (37±1°C) lubrication bath with protein skimmer.
5. AI-Powered Analytics: Machine learning algorithms predict failure modes from initial test cycles.
6. Regulatory Compliance: Pre-loaded protocols for FDA/CE submission requirements.

Product Features

• Electromagnetic Servo Actuators: 50 kN axial/25 Nm torsional capacity with programmable load ratios (R=0.1–10).
• 6-DOF Kinematic System: Replicates flexion/extension, lateral bending, and axial rotation (±20° range).
• Dynamic Load Control: 0.1–15 Hz frequency range with programmable waveforms (sine, square, random).
• Thermal-Mechanical Chamber: -20°C to +50°C temperature control with 10–95% RH humidity.
• High-Resolution Imaging: Built-in 5MP camera system for crack propagation analysis.
• Safety Suite: Emergency stop, overload clutches, and laser-based specimen breakage detection.

Technical Parameters

Accessories

1. Spinal Component Fixture Kit:
   • Self-centering screw clamps (3.5–7.5 mm)
   • Plate/rod bending jigs with laser alignment
   • Universal connectors for hybrid constructs
2. Thermal-Mechanical Chamber:
   • 25L capacity with rapid cooling/heating (15°C/min)
   • 316L stainless steel interior with HEPA filtration
3. BioTest Pro Software:
   • Automated FEA validation and fatigue limit calculation
   • 21 CFR Part 11-compliant audit trail with blockchain timestamping
   • Remote monitoring via iOS/Android app
4. Operator Kit:
   • Calibrated torque wrench set (0.5–50 Nm)
   • Specimen alignment gauges (ASTM F2193 compliant)
5. Calibration Bundle:
   • NIST-traceable force/torque calibration weights
   • Angular encoder verification tool
6. Safety Kit:
   • Laser safety curtains
   • Acoustic enclosure with 30 dB noise reduction

Другие товары поставщика

	Sand - Falling Testing Machine for Motorcycle Helmets	Main Purposes It is mainly used to test the abrasion - resistance of the lenses of helmet goggles and evaluate their ability to resist particle - ...
	Universal finger friction tester	Brief Introduction Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material, ie...
	Compression Fatigue Testing Machine for Intervertebral Fusion Cages	Standard YY/T 0959-2014 (China): Specifies compression fatigue testing protocols for intervertebral fusion devices, including load ratios, frequ...
	Paper water absorption tester	Paper water absorption tester - Other test instrument - standard Product Introduction: Paper water absorption tester, also known as Kleim test in...
	Vickers hardness tester	Vickers hardness tester uses computer software programming, optical measurement system. Through the soft key input, the measurement of Vickers and ...

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...