Glove Cut Resistance Tester
Все товары поставщика
Product Introduction:
The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure the cutting resistance of gloves. Widely used in fire research institute, fire gloves production enterprises, national quality inspection units.
Main technical parameters:
1, blade: stainless steel blade, hardness is not less than HRC45, the cutting edge length should not be less than 65mm, the width should not be less than 18mm, the thickness of （1.0±0.5）mm, the width of the blade bevel is （2.5±0.2）mm, the Angle of the cutting edge is 22°
2, weight bracket: the sum of its quality and blade quality should not be greater than 200g
3, Tool holder: The Angle between the blade plane and the long shaft of the sample fixture is （90+2）。 The Angle between the cutting edge and the short shaft of the sample fixture is （90+2）。
4, sample fixture: the surface of the arc type of metal fixture, arc radius of （38±05）mm, length should not be less than 110mm, width should not be less than 32mm
5, support frame: can ensure that the sample fixture at the specified rate along the direction of the blade edge
dynamic
6, sample size :50mmx50mm
7,Power supply :AC220V 50Hz 4kW
Meet the standard:
GB/T8965-2009 "Protective clothing flame retardant protection Part 1 Flame retardant clothing"
GA7-2004 Fire gloves
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Universal finger friction tester | Brief Introduction Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material, ie... |
 |
Catheter Leakage and Compliance Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Leakage and Compliance Tester The catheter leakage a... |
 |
Stain resistance tester for architectural coatings | Product Introduction: The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often... |
 |
Battery Powder Compaction Density Measurement System | Standard Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Powder Tapped Density Analyzer provides certified results fo... |
 |
Femoral Condyles Components Fatigue Performance Tester | Standard ASTM WK51649: Specifies fatigue testing protocols for metallic femoral components in total knee arthroplasty, including F-N curve gener... |
Похожие товары
 |
KL‑016A Benchtop High‑precision pH Meter | Продавец: Келийлонг Электронные Акционерные Компании | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Продавец: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Продавец: Коллирон электроникс лимитед | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Продавец: Коллирон электроникс лимитед | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Продавец: Коллирон электроникс лимитед | Range EC ～19.9mS TDS Temp 0～50℃ R... |
