Hydraulic Oil Precision Filter Tester

1.Conformity standard:

GJB420. NAS1638. ISO4406. 18/16/13

2.Characteristics and Applications

2.1 Features of oil filter:

● Specialized gear pump set with low noise, strong self-priming ability and smooth operation.

● The high pressure pipeline is equipped with overflow protection device, which can effectively protect the safety of the hydraulic system.

● The coarse filter at the suction port protects the oil pump and extends the service life of the main filter.

● The fine filter can be selected with different precision according to the different needs of users to achieve the required results.

● The panel is equipped with a pressure gauge, which continuously indicates the operating condition of the system and the degree of contamination of the filter element during operation. There are differential pressure transmitters on the pre-filter and fine filter to indicate the system cartridge at any time.

2.2 Application of oil filtering machine:

Filtration of hydraulic lubrication system during refueling.

● Bypass filtration of hydraulic lubrication system during operation.

● Circulation filtration of hydraulic lubrication system before operation.

● Hydraulic lubrication system oil is not filtered and pumped out by the pump of the equipment itself.

(Note: This machine is not applicable to flammable and explosive media such as fuel oil.)

3. Technical Parameters:

Working Pressure: 0.6MPa

Differential Pressure for Alarm: 0.2MPa

Flow Rate: 50±5L/min

Medium: ≤160mm/s (20℃)

Accuracy: 5μm

Rated Power: 2.2KW

Power Supply Voltage: 3-phase 380V

Frequency: 50Hz

Operating temperature: 20 ℃ - 70 ℃

4. Cleaning and replacement of the filter:

When the oil filter works for a period of time, the oil filter oil system pressure increases accordingly, the performance of its components have different effects, especially on the filter precision of the filter element of the shadow

core damage, the main reason for this is that the filter element of the differential pressure rises, the need to replace the filter element. Specific cleaning and replacement methods are as follows:

4.1 Cleaning: (only on the pump before the suction oil filter)

4.1.1 Cleaning cycle: oil filter continuous work for a week (about 150 hours)

a. Unscrew the top cover of the oil suction filter and take out the filter element.

b.Cleaning the filter element:When cleaning the filter element, soak it with gasoline for about half an hour and then remove the impurities with a brush.

4.2 Replacement

4.2.1. Conditions for replacement: When the oil filter is filtering, when the red indicator pops up on the differential pressure alarm installed on the pre-filter and fine filter, the cartridge needs to be

4.2.2 Replacement method: loosen the four bolts on the upper cover of the pre-filter and fine filter, remove the upper cover, take out and replace the filter element.

5.Precautions

5.1 The oil filter can not filter gasoline and other flammable liquids.

5.2 If the oil pool (or tank) of the oil is too dirty and there may be large obstacles, in the suction port should be installed on the large mesh filter protection.

5.3 The oil suction and discharge pipes should be kept clean.

Другие товары поставщика

	Paper absorbance tester	Paper absorbance tester - Other test instrument - standard Product Introduction: It is an instrument used to determine the surface water absorpti...
	Paper whiteness tester	Paper whiteness tester - Other test instrument - standard Product Introduction: Paper whiteness tester is suitable for the whiteness measurement ...
	American European bending tester	Test Purpose： To determine if metal wires in children's products bend or break under stress, creating sharp edges or points that pose cho...
	Molten Metal Penetration Resistance Tester	Standard ISO 9185(Protective Clothing - Assessment of Resistance to Molten Metal Splash) ASTM F955(Standard Test Method for Evaluating Heat Tra...
	KES - NDG5 Puncture Strength Tester	Compliance Standards ASTM D638 (Plastics Tensile Properties) ISO 13934-1 (Textile Tensile Strength) SAE J2749 (Automotive Composite Testing) JI...

Все товары поставщика

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...