Pump and Valve Contamination Tolerance Tester

Meet the standard:

ISO 4406 ISO 18413

ISO 10707 ISO 6403

ISO 10372 NFPA T2.6.1

Product Introduction:

Solid particle contamination is a major cause of wear, silting, stiction, leakage, and ultimately failure in hydraulic pumps and valves. A Pump and Valve Contamination Tolerance Tester provides a controlled environment to subject both component types to contaminated fluid and assess their performance over time.

The tester typically consists of a hydraulic test circuit where the pump(s) and valve(s) under evaluation are installed. A reservoir holds a volume of test fluid (hydraulic oil) which is intentionally contaminated with a specific type and concentration of solid particles.

The pump circulates this contaminated fluid, and the system includes a loading mechanism (e.g., restrictors, actuators) to operate the pump and cycle the valve(s) under realistic pressure, flow, and temperature conditions.

Throughout the test, which may involve running for extended durations or millions of cycles, the performance of both the pump and the valve(s) is monitored. Pump performance measurements include flow rate (volumetric efficiency), pressure, speed, and potentially power consumption.

Valve performance measurements vary depending on the valve type (directional control, pressure control, flow control) but can include leakage rate, pressure control accuracy, flow regulation accuracy, response time, and the force or current required to shift spools. The cleanliness level of the circulating fluid is continuously or periodically verified using fluid sampling and particle counting according to standards like ISO 4406. After the test, component performance is re-measured, and the pump and valve(s) are often disassembled for detailed visual inspection and quantitative measurement of wear on critical surfaces. This comprehensive evaluation provides crucial data on how contamination affects the operational lifespan and performance stability of both pumps and valves.

The instrument is used for:

Evaluating the wear resistance and durability of hydraulic pumps and valves simultaneously under contaminated fluid conditions.

Determining the impact of fluid contamination on the performance characteristics (efficiency, leakage, control accuracy, response time) of pumps and valves over time.

Validating the contamination tolerance of pump and valve designs, materials, and manufacturing processes.

Benchmarking the contamination resistance of different pump and valve models or manufacturers.

Research and development of more robust hydraulic components for use in contaminated environments.

Assessing the effectiveness of design modifications in improving contamination tolerance.

Product Advantages:

Provides a comprehensive evaluation of both hydraulic pump and valve performance and wear resistance in a single test setup under contaminated conditions.

Simulates the interaction of contaminated fluid with key components in a hydraulic circuit.

Essential for selecting pumps and valves that can reliably operate in hydraulic systems with expected levels of fluid contamination.

Helps validate component designs and materials specifically for resistance to wear and degradation caused by particles.

Provides objective, quantitative data on the long-term effects of contamination on pump and valve performance.

Supports research and development efforts aimed at improving the robustness and lifespan of hydraulic components.

Technical indicators:

　　1. Test medium: hydraulic oil

　　2. Temperature of medium: 10～80℃.

　　3. Test dust: ISO 12103-A3

　　4. Test pressure range: 0.5 ~ 6MPa

　　5. Test flow: 1～20 L/min

　　6. Purification cleanliness: -/12/10 (GB/T

　　7. Test tank volume: 40L

　　8. Execution standard: JBT 7857-2006

　　9. Equipment power supply: AC380V / 50Hz

　　10.Power of the whole machine: 5.5kW

Другие товары поставщика

	Multiple Times Pass Test Bench	Multiple Times Pass Test Bench - Filter material testing instruments price and quotation - standard Standards: ISO16889:2008 Industrial trucks ...
	Intervertebral Fusion Cages Shear Fatigue Tester	Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ...
	Rupture strength tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M...
	Automatic open flash point tester	Product Introduction: The instrument can automatically test the flash point and ignition point of petroleum products （the ignition point of oil ex...
	Static Tensile Tester	Standards: Standard Accordance with the requirements of the standards such as ASTM D3107 Applications: Static Tensile Tester isused for st...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...