Protective Clothing Liquid Static Pressure Tester
Все товары поставщика
Instrument use:
The acid-proof clothing material anti-seepage acid static acid pressure tester is used to measure the acid-base anti-seepage of breathable acid-base protective clothing materials - static acid pressure resistance and liquid static pressure resistance.
Working principle:
The resistance to liquid static pressure borne by the fabric is used to indicate the resistance encountered by the test liquid through the fabric. Under the atmospheric pressure of 101.325kPa, the bottom of the sample is subjected to a continuously rising liquid pressure. Until there are three leaks, and the height of the liquid column at this time is recorded, which is called the fabric resistance to liquid static pressure.
Technical parameters:
1. Test solution: 80% concentrated sulfuric acid with different concentrations of acid and alkali
2. Rising rate of acid pressure test solution: (60±3) cm/min
3. Maximum pressure: 150mm liquid column "Maximum acid pressure: greater than 150mmH2SO4 (80%)"
4. Range: 0~150mm liquid column "0~150 mmH2SO4 (80%)"
Test preparation:
Take 3 samples from the finished protective clothing with a diameter of 32mm
Test steps:
1. The reagent contacts the sample vertically from below
2. Pressurize the reagent continuously and stably
3. Observe the sample and record the static pressure of the liquid when the third liquid drop appears on the sample
4. Each sample should be tested 3 times, and the arithmetic average is taken to obtain the static pressure value of the sample
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
The resistance tester for protective clothing materials against metal molten liq/ | Standards: BS EN 348:1992 Protective clothing. Heat-resistant and fire-resistant. Determination of heat transfer in proximity to fire. ISO 9185 - ... |
 |
KES - FB2 - L Large - scale Bending Tester | Content TheLarge Bending Tester accurately and quickly measures factors related to curvatures in small bending moments (bending hardness and recov... |
 |
Cloth Loosening Machine | It is applicable to loosen cloth in many industries such asgarment, bags and suitcases, shoes and hats, quilting,home textiles, curtains etc. Basi... |
 |
Pipe drop hammer impact testing machine | Pipe drop hammer impact testing machine - Other test instrument - standard Product Information: Product Introduction: 1. Name: drop hammer impac... |
 |
Photovoltaic module outdoor exposure test system/ photovoltaic weathering station/ IEC 61215 outdoor test system/ Solar panel outdoor exposure testing | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61730: Photovoltaic (PV) Module Sa... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
