Chrysler Bending Tester

• 

Brief Introduction

Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,

ie mechanical stability of the coating.Design Basis Chrysler laboratory test method LP-463LB-9-01.

This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material.

Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking,

lamellar separation of vinyl and other soft furnishings and other materials

Product Description

A tester simultaneously tests four samples, including three bend specimens and a folded specimen.

When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,

the bending test.The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.

If possible, close the flat to exert the appropriate pressure.Bend specimens’ tension with a fixed weight. Tension must be controlled.

Technical Parameter

1. Desktop;

2. Bending test stations: 3 stations;

3. Folding stations: 1 station;

4. Each sample holder may be separately provided on the specimen holder and tension;

5. The rod Working stroke: 70mm; (2.75in.)

6. Fixture spacing: (. 6in) 152mm;

7. Working frequency: 35 times / min;

8. The bending load test: Each sample 36N (8lbf.), Adjustable;

9. The folding load test: After the closure 641N (12lbf.);

10. The bend test specimen size: 76 × 203mm; (3 × 8in.)

11. The folding test sample size: 129 × 129mm; (5 × 5in.)

12. The feature can be manually reset electronic counters;

13. Electronic Counter: 6 digits;

14. Dimensions: 36 × 12 × 20 (length × width × height).

Другие товары поставщика

	Double Plate Thermal Conductivity Apparatus	Standards: GB/T 10294-2008 ?Determination of Steady State Thermal Resistance and Related Properties of Thermal Insulation Materials GB/T 3399-19...
	Zipper Comprehensive Strength Testing Machine	Meet the standard: ASTM D2061 ASTM D2060 BS 3084 JIS S3015 DIN 3419 Product Introduction: The mechanical strength of a zipper's components i...
	Floor Material Burning Performance Tester	Standards: ASTM E648-15 Standard test method for critical radiant flux of floor-covering systems using radiant heat energy source BS EN ISO Rea...
	Intervertebral Fusion Cages Shear Fatigue Tester	Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for intervertebral fusion devices, including load ratios, frequency, ...
	Roller Abrasion Tester	Applications: The test roller is clamped by the test arm through the bearing. During the test, the actual use condition of material is simulated b...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...