Helmets Vertical SpacingInfrared - positioning Tester/ safety helmet vertical spacing tester / helmet fit measurement device

• 

Purpose

This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets.

Applicable Standard

GB/T 2812-2006

GB 2811-2019

Technical Parameters

1. Digital height gauge, which can display the height in real - time, with a measuring range of 0 - 500mm.

2. Adopts infrared positioning.

3. First, wear the test sample on the standard - specified head mold according to the standard requirements, and adjust it to make the heights on both sides of the hat hoop consistent.

4. Measure the vertical distance from the lowest point of the bottom edge of the hat hoop on the side of the sample to the top of the head mold as the wearing height, record the measured value and be accurate to 1mm.

5. Measure the vertical distance from the position of the point on the edge of the minor axis of the helmet shell relative to the head mold to the top of the helmet shell as X1.

6. Remove the wearing system and cushioning liners, place the sample on the head mold again, and ensure that the posture of the helmet shell is the same as before removal.

7. Measure the vertical distance between the same points as X2.

Другие товары поставщика

	Leather edge oil fatigue testing machine	Product Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colore...
	End-face rotary friction and wear testing machine	Main uses: The end-face rotary friction and wear testing machine is mainly used to evaluate the wear resistance and tribological behavior of mater...
	AATCC Accelerotor	AATCC Accelerotor - Textile and Apparel - standard Standards: ATCC 93,M&S P26,M&S P53,NEXT 31 Applications: AATCC Accelerotor, to...
	Seat Belt Abrasion Tester	Standard： ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance) ECE R16(Uniform Provisions Concerning the Approval of Safety Bel...
	Spring tension testing machine	Product Introduction: The spring tension and compression testing machine has accurate loading speed and force measurement range, and has high prec...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...