Polysilazane Resin STD-8824S
Все товары поставщика
Product Introduction
STD8824S is a modified polymethylpolysilazane resin that can be used as a curing agent and heat resistance enhancer for hydroxyl silicone rubber.
Characteristics & Applications
Characteristics:
High temperature resistance
Applications:
Special curing agent
Instructions
Curing method: Use approximately 5% of the main resin with the corresponding catalyst. It can be cured at room temperature within 24 hours.
This substance is highly sensitive to moisture. Prolonged exposure may cause product deterioration.
After opening, flush with N2/Ar to replace air and store at low temperature to extend usability.
Technical Parameters: Before Curing
|
Appearance |
Colorless or pale yellow transparent liquid |
|
Viscosity (25℃) |
1500-4000 |
|
Density (g/cm³) |
0.95-1.10 |
Packaging
1kg, 5kg
Storage Conditions & Shelf Life
6 months unopened (5-25℃)
Personal Protection
|
Personal Protective Equipment |
Impermeable gloves to avoid skin contact. |
|
Respiratory Protection |
No special protection required. |
|
Eye Protection |
Chemical splash goggles recommended. |
|
Body Protection |
Use protective clothing resistant to this product. Equip with boots, gloves, eyewash stations, and emergency showers as needed. |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Helmet Wearing Height Testing Machine | Helmet Wearing Height Testing Machine - Other test instrument - standard Standards: EN 397 Applications: Measure the wearing height of he... |
 |
Hydraulic Pump Contamination Resistance Tester | Hydraulic pump pollution resistance test bench is mainly used to detect the fuel pump in the specified concentration of pollution in the operating ... |
 |
Chrysler Bending Tester | Brief Introduction Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material, ie... |
 |
Socks waterproof testing machine | Product Information: Reference standard: HG/T 3664-2000, GB 25037-2010 and other standards Test principle: Pour air into the stocking through... |
 |
Photovoltaic module wire tube bending testing machine | Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Eu... |
Похожие товары
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Продавец: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
