KES - FB2 - S Bending Tester
Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Все товары поставщика
Все товары поставщика
Compliance Standards
ASTM D790 (Plastics Flexural Properties)
ISO 178 (Flexural Strength of Rigid Plastics)
SAE J2748 (Automotive Composite Flexure)
IEC 62133-2 (Battery Module Bending)
EN 1170-5 (GRC Flexural Testing)
Technical Parameters
| Parameter | Specification |
|---|---|
| Force Range | 0.1N - 2000N (±0.5%) |
| Deflection Accuracy | ±1μm @ 10mm span |
| Test Speed | 0.1 - 500 mm/min |
| Support Spans | 10-500mm (adjustable) |
| Bending Radius | 0.5-100mm (±0.01mm) |
| Angular Resolution | 0.01° |
Key Features
3-point & 4-point bending configurations
Real-time curvature measurement system
Automatic neutral axis calculation
High-speed strain mapping (1000 fps)
Multi-stage bend/reverse bend cycles
Test Capabilities
| Test Type | Standard | Parameters |
|---|---|---|
| Flexural Modulus | ASTM D790 | 2% strain limit |
| Bending Fatigue | ISO 12106 | 10⁷ cycles @ 20Hz |
| Springback Analysis | SAE J2748 | 180° bend + release |
Measurement System
- Dual-axis load cell (Fz + Mx)
- Laser-based deflection tracking
- Surface strain mapping via DIC
- Real-time moment-curvature plots
Standard Configuration
- Stiffness-rated frame (100kN/m)
- Interchangeable rollers (R1-R50mm)
- TestXpert III analysis software
- 2000N capacity load cell
Automotive Options
- Battery pack torsion simulation
- Seat structure cyclic loading
- Door seal compression-bend
- Thermal cycling (-40°C to 150°C)
Safety Systems
- Over-moment protection
- Emergency roller retraction
- Specimen ejection detection
- Automatic force dump circuit
Implementation Notes
- Calibrate per ISO 5893 (Roller alignment)
- Maintain 40-60% RH for polymer tests
- Use alignment jig for multi-layer stacks
- Ground isolation for electronic components
Implementation Notes
- Calibrate per ISO 5893 (Roller alignment)
- Maintain 40-60% RH for polymer tests
- Use alignment jig for multi-layer stacks
- Ground isolation for electronic components
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Fabric Fiber Shedding Degree Tester (Friction Method)/ | Instrument Testing Principle Lay the specimen flat and fix it on the holder. Make the wet abrasive attached to the friction head perform reciproca... |
 |
Strip evenness tester | Product Introduction: Cotton yarn fiber strip analyzer is a high performance, high test efficiency of textile laboratory instrument, it is used to... |
 |
Metal Wire Repeated Bending Tester | Main uses: Metal wire repeated bending tester used for repeated bending test of wire, for different specifications of wire bending radius can be r... |
 |
Plastic Friction and Wear Tester | Product Description: Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can b... |
 |
Sock Durability Tester | Product Introduction: Socks wear tester is a special equipment, mainly used to test the wear resistance of socks material. It evaluates the comfor... |
Похожие товары
 |
KL‑016A Benchtop High‑precision pH Meter | Продавец: Келийлонг Электронные Акционерные Компании | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Продавец: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Продавец: Коллирон электроникс лимитед | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Продавец: Коллирон электроникс лимитед | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Продавец: Коллирон электроникс лимитед | Range EC ～19.9mS TDS Temp 0～50℃ R... |
