Stain resistance tester for architectural coatings
Все товары поставщика
Product Introduction:
The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often use some neutral detergent to scrub the coating to remove stains, so the coating with good stain resistance is more and more popular.
Architectural coating stain resistance tester is designed and manufactured according to the latest national standard GB/T9780-2013 "Architectural coating stain resistance test method" : The coating stain resistance is evaluated by removing film stain removal rate, using stains as pollution sources, and attached to the coating test board by dip cleaning method or scrape coating method. The pollution resistance test is carried out with specified loads and times. The stain resistance of coated and coated test plates was evaluated by measuring the change of reflection coefficient before and after the test.
This instrument is mainly used to evaluate the antifouling ability of building interior wall coatings after adhesion to primary domestic pollution and scrubbing with neutral detergent. The main purpose is to evaluate the ability of building paint department to resist common domestic pollution. At the same time, the setting and counting of the number of scrubbing resistance of the instrument are displayed by the LCD screen, so that the whole test process is clearer and the operator is more convenient.
Technical parameters:
Friction head (including weight) weight :1500±109
Friction speed :10——99 times/min (any setting)
Friction stroke :300mm
Friction times :0——99999 times (any setting)
Input voltage: AC 220V50Hz
Test plate size: black PVC plastic sheet, size :432mmx165mmx0.25mm
Overall dimensions :590mmx460mmx300mm
Net weight :30 KG
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Cupping Tester | Meet the standard: ISO 1520 ASTM E643 EN ISO 1520 DIN 50101 DIN 50102 Product Introduction: The cupping test provides valuable information... |
 |
Coating abrasion resistance tester | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Safety Helmet High Temperature Pre-Treatment Chamber | Main Purpose It is mainly used for the extremely high - temperature pre - treatment of safety helmets. Compliance Standard GB/T2812-2019 Te... |
 |
Cupping Tester | Meet the standard: ISO 1520 ASTM E643 EN ISO 1520 DIN 50101 DIN 50102 Product Introduction: The cupping test provides valuable information... |
 |
Bearing Friction Torque Measuring Instrument | Main Purposes of Bearing Friction Torque Tester The bearing friction torque tester is a precision instrument specifically designed for measuring t... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
