Stain resistance tester for architectural coatings
Product Introduction:
The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often use some neutral detergent to scrub the coating to remove stains, so the coating with good stain resistance is more and more popular.
Architectural coating stain resistance tester is designed and manufactured according to the latest national standard GB/T9780-2013 "Architectural coating stain resistance test method" : The coating stain resistance is evaluated by removing film stain removal rate, using stains as pollution sources, and attached to the coating test board by dip cleaning method or scrape coating method. The pollution resistance test is carried out with specified loads and times. The stain resistance of coated and coated test plates was evaluated by measuring the change of reflection coefficient before and after the test.
This instrument is mainly used to evaluate the antifouling ability of building interior wall coatings after adhesion to primary domestic pollution and scrubbing with neutral detergent. The main purpose is to evaluate the ability of building paint department to resist common domestic pollution. At the same time, the setting and counting of the number of scrubbing resistance of the instrument are displayed by the LCD screen, so that the whole test process is clearer and the operator is more convenient.
Technical parameters:
Friction head (including weight) weight :1500±109
Friction speed :10——99 times/min (any setting)
Friction stroke :300mm
Friction times :0——99999 times (any setting)
Input voltage: AC 220V50Hz
Test plate size: black PVC plastic sheet, size :432mmx165mmx0.25mm
Overall dimensions :590mmx460mmx300mm
Net weight :30 KG
在线联系供应商
Other supplier products
 |
Automatic Edging Folding Burling Machine | It is applicable to fabric inspection in manyindustries such as garment,shoes and hats,quilting and home textile etc. to pile up in width500-600mm ... |
 |
Catheter Residual Vacuum Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Residual Vacuum Tester The catheter residual vacuum ... |
 |
Button Impact Machine | Testing Standards: ASTM D5171 Application:Button falling weight impact testeris used to determine the impact resistance of plastic sew-through fl... |
 |
Leather Water Vapor Permeability Tester | Standards: UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 0... |
 |
Mask Visual Field Tester | Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: ... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
