Vapor Shrinkage Tester

• 

I. Product Overview

TheVapor Shrinkage Testeris a specialized thermal analysis instrument designed to measure dimensional changes in textiles, polymers, or composites when exposed to steam or saturated vapor environments. It simulates industrial finishing processes (e.g., sanforization) to evaluate shrinkage resistance and dimensional stability of materials.

• Type: Environmental test chamber with steam generation
• Test Temperature: Ambient +20°C to 100°C
• Steam Pressure: 0.1-0.3 MPa (adjustable)
• Chamber Size: 500×500×600mm (W×D×H)
• Applications: Textile finishing, geotextiles, medical fabrics

II. Technical Specifications

III. Key Features

• Dual Test Modes:
  • Static Vapor Mode:Continuous steam exposure
  • Dynamic Steam Mode:Cyclic steam/air alternation
• Advanced Measurement:
  • 3D surface mapping (16,000 measurement points)
  • Real-time shrinkage rate calculation
  • Automated sample alignment system
• Safety Features:
  • Pressure relief valve (auto-shutdown at 0.35MPa)
  • Anti-scald door interlock
  • Overheat protection (triggers emergency cooling)

IV. Compliance Standards

• ISO 6330 (Textile testing - Textile fabrics)
• ASTM D3759 (Shrink resistance of fabrics)
• AATCC 133 (Dimensional changes in fabrics)
• GB/T 8629 (Chinese textile shrinkage standard)

V. Applications

1. Textile Manufacturing:Pre-shrinkage treatment validation
2. Quality Control:Batch testing of finished fabrics
3. R&D:Developing shrink-resistant coatings
4. Forensic Analysis:Evaluating garment shrinkage causes

Standard Test Procedure:

1. Sample Preparation: Cut 50×50mm specimens
2. Loading: Secure in steam-permeable clamps
3. Parameter Setup: Select steam pressure/temperature
4. Exposure: Run test cycle (typically 30-60min)
5. Analysis: Compare pre/post-test dimensions via software

Safety Precautions:

• Use heat-resistant gloves when handling samples
• Maintain 1m clearance from steam vents
• Decontaminate chamber after testing chemicals

Другие товары поставщика

	ISO Tank Automatic Cleaning	A robot system to clean ISO truck tank by high pressure water. By our patent special design and system program, we launched the automatic clean st...
	Car seat fatigue tester-QINSUN	Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym...
	Dynamic fatigue testing machine	Applications: Theseam fatigue testeris designed to evaluate the fatigue resistance of seam on the material which is applied on the surface of auto...
	Blackboard Shaker	Product Overview The Blackboard Shaker is a multifunctional kitchen tool designed for seasoning control, featuring a chalkboard surface for labeli...
	Customized barrel pump setup catalyst	Pressureless Feeder Pressureless Double Layer Feeder Pneumatic Pumping Equipment Hood Alley Feeder Hooded High Pressure Feeder Double ...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...