Automatic folding recovery tester-QINSUN
Instrument Introduction
This instrument detects the recovery property of fabrics by applying specific test methods (BS, ISO, AATCC). It presses fabric samples under certain loading devices for a specified time, then releases them into sample clamps to allow free recovery while recording the recovery angle.
The equipment determines sample recovery performance from horizontal creases through measured wrinkle recovery angles, particularly suitable for wrinkle-prone fabrics like cellulose-based and other woven materials.
Test Principle
Specimens of defined shape and size are folded and compressed under specified conditions for a set duration. After load removal, the samples undergo specified recovery time before the wrinkle recovery angle is read from a graduated dial, quantifying the fabric's crease recovery capability.
Functional Features
1. Ergonomic load application device for convenient specimen compression
2. Precision sample clamping mechanism ensuring horizontal positioning without bulging or slippage
Technical Specifications
1. Load weight: (500 ± 5) g × 2 units
2. Circular dial: 10°~180° measurement range
3. Sample dimensions: 40×15 mm
4. Tablet dimensions: 18×14 mm
5. Pincer jaw width: 25 mm
6. Net weight: 6 kg
7. Dimensions: 17×17×36 cm (L×W×H)
Referenced Standards
AATCC 66-2014, GB/T 3819, ISO 2313, GA 573-2009, BS EN 22313, M&S P22
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Automotive Wires Ozone Aging Chamber-QINSUN | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a... |
 |
Air - tightness Testing Device for Automotive Connectors-QINSUN | The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe... |
 |
Schopper Abrasion Tester | Standards DIN 53863, Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indu... |
 |
Steam Jet Testers | Standards DIN EN ISO 16925:20 DBL 5416 Ford BO 160-04 GM 9531 Volvo STD 423-0015 VW PV 1503 BMWAA-0136 Renault D 252018 PSA D 255376 MA... |
 |
Cleaning lance for tank cleaning nozzles | Cleaning lance for tank cleaning nozzle Material: 304SS, 316SS, Teflon on request Size: customizable Length: customizable Connection: flange, t... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
