Automatic folding recovery tester-QINSUN
Instrument Introduction
This instrument detects the recovery property of fabrics by applying specific test methods (BS, ISO, AATCC). It presses fabric samples under certain loading devices for a specified time, then releases them into sample clamps to allow free recovery while recording the recovery angle.
The equipment determines sample recovery performance from horizontal creases through measured wrinkle recovery angles, particularly suitable for wrinkle-prone fabrics like cellulose-based and other woven materials.
Test Principle
Specimens of defined shape and size are folded and compressed under specified conditions for a set duration. After load removal, the samples undergo specified recovery time before the wrinkle recovery angle is read from a graduated dial, quantifying the fabric's crease recovery capability.
Functional Features
1. Ergonomic load application device for convenient specimen compression
2. Precision sample clamping mechanism ensuring horizontal positioning without bulging or slippage
Technical Specifications
1. Load weight: (500 ± 5) g × 2 units
2. Circular dial: 10°~180° measurement range
3. Sample dimensions: 40×15 mm
4. Tablet dimensions: 18×14 mm
5. Pincer jaw width: 25 mm
6. Net weight: 6 kg
7. Dimensions: 17×17×36 cm (L×W×H)
Referenced Standards
AATCC 66-2014, GB/T 3819, ISO 2313, GA 573-2009, BS EN 22313, M&S P22
Other supplier products
|
|
CIP cleaning system |
CIP cleaning system
Clean-in-place (CIP) is an automated method of cleaning the interior surfaces of pipes, vessels, equipment, filters and associ... |
|
|
Yarn Loop Length Tester |
Compliance Standards
FZ/T 70001-2003. FZ/T 71004-2003
Scope of Application
Determines loop length of various yarns and knitted loops. Verifies c... |
|
|
Glow wire tester |
F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh... |
|
|
Solar Radiation Meters |
Product Introduction:
The purpose of this instrument is to measure the temperature change of the sample with radiant heat.
Arrange the sample and... |
|
|
Taber Abrasion Resistance Tester |
Standards
ISO Standards: ISO 9352, ISO 5470, ISO 7784
ASTM Standards: ASTM D1044, ASTM D3884, ASTM D4060
Chinese Standards: GB/T 5137.1, QB/T ... |
All supplier products
Same products
