Reciprocating Friction and Wear Testing Machine

• 

Applicable Standards

ASTM Standards: Formulated by the American Society for Testing and Materials (ASTM), standards such as ASTM D6079 are used to evaluate the friction coefficient and anti - wear properties of lubricating oils. ISO Standards: Standards like ISO 12156 established by the International Organization for Standardization (ISO) are also applicable to these tests. National Standards: In China, the tests may need to comply with the GB/T series of national standards, which have detailed provisions on testing methods, conditions, data processing, etc. Industry Standards: Depending on specific application fields and testing requirements, certain industry - specific standards are also involved. These standards are developed according to the testing requirements for specific materials or application areas.

Materials Science Research

Research the friction and wear properties of various materials, including metals, non - metals, and composite materials. Provide support for material improvement and optimization based on test data, and drive the research and development of new materials.

Mechanical Engineering Applications

Evaluate the wear resistance of key mechanical components such as engine pistons, gears, and bearings. Predict their service life and performance in actual use, assist in optimizing mechanical designs, and enhance product reliability and durability.

Study the wear resistance of spacecraft materials, simulate friction conditions in extreme environments, assess the abrasion - resistance ability of materials, and ensure the reliability and safety of spacecraft.

Test the wear resistance of automotive components like brake pads, tires, and engine parts. Evaluate their wear - resistance and durability in practical use to improve the quality and performance of automotive products.

In industries such as coatings, plastics, decorative fabrics, automotive interiors, and tufted fabrics, detect the scratch - resistance and wear - resistance properties of materials, providing support for product quality control and performance enhancement.

Technical specifications

Maximum stroke of the actuator： 280 mm

Max. sliding speed： 100 mm/s

Maximum repetition rate： 0.3 Hz

Load range： 20-2500 N

Cyclic load amplitude： Up to 50% of set point

Cyclic load type： Sine or Triangle

Cyclic loading rate： 1 HZ max.

Pneumatic bellows capacity： 420 N/bar

2500 N air pressure： 6 bar

Friction： 0-50N and 0-2000N

Displacement： 0-2.5 mm

Resolution： 1 um

Oil pool： max. temperature 200°C

Data acquisition (high speed)： 16 bit resolution at 100 KHz sampling frequency max.

Другие товары поставщика

	Face Mask Tensile Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction: The test machine uses the integrated structure of the motor and the speed co...
	Rotary Reciprocating Friction Wear Testing Machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications You can use this tester to: Evaluate the tribological performance of materia...
	ASTM E84 Building Materials Flame Spread Test Apparatus，Steiner Tunnel Test Furnace	Whats/App: +86 156 1874 6768 Web: standard-groups.com The ASTM E84 Building Materials Flame Spread Test Apparatus is designed to evaluate the com...
	Appliance Stability Testing Apparatus (for Appliance Stability Tester)	Product Introduction The device conforms to GB4706-1 Article 20.1. IEC60335-1 Article 20.1 and other standards. The device is composed of a workbe...
	Surface Performance Tester STD-FB4-A，flexible material surface performance tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Surface Performance Tester is a high-precision instrument designed to quantify the surf...

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...