Thrust Bearing Rolling Friction and Wear Testing Machine
Applicable Standards:
ASTM D3702
ASTM G99
ASTM G77
ISO 18535
Product Advantages:
Simulates Real-World Conditions: Allows testing under controlled load, speed, temperature, and lubrication conditions relevant to actual thrust bearing operation.
Quantifies Friction and Wear: Provides objective, measurable data on key performance indicators.
Enables Material and Lubricant Comparison: Facilitates the evaluation and selection of the best materials and lubricants for specific applications.
Predicts Bearing Life: Wear rate data can be used to estimate the expected lifespan of thrust bearings.
Supports Design Optimization: Provides critical feedback for improving bearing designs to reduce friction and wear.
Standardized Testing: Allows for testing according to recognized industry standards.
Technical data:
Maximum radial load: 5 kN
Maximum spindle diameter: 5 to 30 mm
Spindle taper: DIN 69871A, ISO 50 taper
Rotary motion:
Speed: 0 to 2000 rpm
Continuous torque: 56.4 Nm
Peak torque: 136 Nm
Oscillating motion:
Ranges: variable 0 to +/-20°
Frequency: 0.001 to 1 Hz
Axial motion:
Maximum thrust: 5 kN Stroke: 0 to 30 mm Frequency: 0.001 to 1 Hz kN
Stroke: 0 to 30 mm
Frequency: 0.001 to 1 Hz
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Urinary Catheter Strength Tester | The Urinary Catheter Strength Tester is designed to evaluate the physical strength and mechanical properties of urinary catheters. It provides accu... |
 |
Automatic Reaction Calorimeter | Standards GB 51283 GB/T 22232 GB/T 17802 SN/T 3078.1 Product Features 1. It offers three calorimetry methods: heat - flow, power - compensati... |
 |
Sponge foam collapsible hardness tester | This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested according to the n... |
 |
Image test standard transmission light box | Standard CIE 15:2004: Adheres to colorimetry standards for spectral measurement. ISO 3664:2009: Compliant with viewing conditions for graphic art... |
 |
Aatcc Standard Electric Rubbing Color Fastness Tester | ElectronicCrock Meterisused for testing the fastness to dry or wet rubbing and the fastness to brushing of all kinds of colored textiles, motorized... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
