Thrust Bearing Rolling Friction and Wear Testing Machine
Applicable Standards:
ASTM D3702
ASTM G99
ASTM G77
ISO 18535
Product Advantages:
Simulates Real-World Conditions: Allows testing under controlled load, speed, temperature, and lubrication conditions relevant to actual thrust bearing operation.
Quantifies Friction and Wear: Provides objective, measurable data on key performance indicators.
Enables Material and Lubricant Comparison: Facilitates the evaluation and selection of the best materials and lubricants for specific applications.
Predicts Bearing Life: Wear rate data can be used to estimate the expected lifespan of thrust bearings.
Supports Design Optimization: Provides critical feedback for improving bearing designs to reduce friction and wear.
Standardized Testing: Allows for testing according to recognized industry standards.
Technical data:
Maximum radial load: 5 kN
Maximum spindle diameter: 5 to 30 mm
Spindle taper: DIN 69871A, ISO 50 taper
Rotary motion:
Speed: 0 to 2000 rpm
Continuous torque: 56.4 Nm
Peak torque: 136 Nm
Oscillating motion:
Ranges: variable 0 to +/-20°
Frequency: 0.001 to 1 Hz
Axial motion:
Maximum thrust: 5 kN Stroke: 0 to 30 mm Frequency: 0.001 to 1 Hz kN
Stroke: 0 to 30 mm
Frequency: 0.001 to 1 Hz
Send product request
Other supplier products
 |
Coating thickness gauge/film thickness gauge | Standard Coating Thickness Gauge complies with international standards includingASTM B499,ASTM D1400,ISO 2178,ISO 2360, andGB/T 4956, ensuring rel... |
 |
UV Aging Test Chamber | The UV aging test chamber is suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageing The exposure ... |
 |
AATCC Viewing Board丨AATCC Viewing Board tester | Standards Built to American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178. Product Informati... |
 |
Electrostatic Decay Tester | The Electrostatic Decay Tester is professionally designed to evaluate the static electricity attenuation characteristics of textile and non-textile... |
 |
Waterproof socks testing machine | Shoes Water Penetration Test Apparatus is used to test waterproof performance of shoes socks and shoes lining of rubber shoes. Standards: HG/T366... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
