Micro Rapid Closed Cup Flash Point Tester(Pensky Martens)

Automatic Flash Point Tester designed for accurate and repeatable determination of the flash point of petroleum products using the Pensky-Martens closed cup method, fully compliant with ASTM D93.

The flash point of a material is the lowest temperature at which it emits enough vapor to ignite in air in the presence of an ignition source. It is a critical parameter for determining the flammability and safety classification of fuels, oils, solvents, and other volatile substances.

Applications

Petroleum & Petrochemical Industry – Testing fuels, base oils, lubricants

Paints & Coatings – Verifying solvent flash points

Pharmaceuticals & Chemicals – Assessing flammability characteristics

Transport & Safety Compliance – Ensuring materials meet regulatory flash point requirements

Environmental & Quality Labs – Standardized material classification

Standards

SN/T 3077.1-2012: Chemicals—Determination of flash point—Part 1: Closed-cup equilibrium method

SN/T 3077.2-2012: Chemicals—Determination of flash point—Part 2: Closed-cup rapid equilibrium method

SH/T 0768-2005: Determination of total contaminants in middle distillate fuel oils—High-temperature filtration method

DL/T 1354-2014: Preparation method of working standard oil for analysis of dissolved gas components in transformer oil

ASTM D93: Pensker-Martins closed-cup flash point determination

ASTM D6450: Small closed-cup flash point determination method

ASTM D3828: Small closed-cup device method for determining the flash point of liquids

ASTM D7094: Improved continuous closed-cup flash point determination method

ASTM D7236: Improved Abel closed-cup flash point determination method

ASTM D56: Tiger closed-cup flash point determination method

ISO 2719: Petroleum products—Determination of flash point—Pensker- Martins Closed Cup Method

ISO 13736: Petroleum Products - Determination of Flash Point - Abel Closed Cup Method

ISO 1516: Petroleum Products - Determination of Flash Point - Tiger Closed Cup Method

ISO 1523: Petroleum Products - Determination of Flash Point - Small Closed Cup Method

IP 34: Determination of Flash Point - Abel Closed Cup Tester Method

IP 304: Determination of Flash Point - Small Closed Cup Method

IP 170: Determination of Flash Point - Pensker-Martins Closed Cup Tester Method

DIN EN 22719: Petroleum Products - Determination of Flash Point - Pensker-Martins Closed Cup Method

JIS K2265: Petroleum Products - Determination of Flash Point

NF M 07-019: Petroleum Products - Determination of Flash Point - Pensker-Martins Closed Cup Method

Features

1. It adopts the advanced continuous closed - cup flash - point test method, which is more accurate and efficient.

2. It requires a small sample amount, resulting in low test costs and minimal pollution.

3. With continuous closed - cup operation, there is no open flame, ensuring high safety.

4. It has a built - in refrigeration module, offering a wide flash - point test range and a fast cooling rate.

5. Standard test methods are preset and can be associated with other closed - cup methods.

6. It features fully automated detection and automatically corrects the flash - point based on atmospheric pressure.

7. It displays temperature and pressure curves in real - time, making the test process more intuitive.

8. The test results include a temperature - pressure rise curve, providing more information about flash combustion.

9. Key components are from well - known international brands, ensuring long - term stable operation.

10. It supports user - level management, enabling the management and control of accounts at different levels.

11. The USB interface is plug - and - play. An optional thermal printer is available for convenient data management.

12. It is equipped with a 7 - inch color touch screen that supports Chinese input, making the operation intuitive and simple.

Technical Parameters

Operating Environment	(5～40)℃, <85%RH
Temperature Range	(0～260)℃
Rising Rate	(-30～260)℃ (with low-temperature module)
Temperature Detection Accuracy	(0～420)℃ (with high-temperature module)
Pressure Detection Range	(-30～420)℃ (with low-temperature and high-temperature modules)
Sample Volume	(2.5±0.3)℃/min, (5.5±0.5)℃/min,
Ignition Method	(0.5～12)℃/min Customized
Stirring Speed	±0.1℃
Storage Space	(0～200)kPa
Interface	1mL or 2mL
Power	High-pressure electronic ignition
Power	(50~300)rpm software can be set
Dimensions	5000 test results
Weight	RS232*1. RJ45*1. USB*2

Accessoriess

1. Binsky-Martin Closed Cup Kit (includes a dedicated cup body and sealing cap, suitable for closed cup testing requirements)

2. Micro-sample pipette (matches the instrument's micro-sample volume injection requirements)

3. Spare ignition needle/igniter assembly (a spare part to ensure stable ignition function)

4. Sealing ring for closed cup (a consumable sealing component for closed cup testing)

5. Spare temperature sensor probe (a core spare part for temperature detection)

6. Standard flash point sample for calibration (a known flash point standard oil compatible with ASTM D93, used for instrument calibration)

7. Dedicated cleaning tools (such as brushes and wiping cloths, for cleaning and maintenance of components such as the cup body)

Test Procedures

Procedure A: For fuels and liquids with flash points between 40°C and 360°C

Procedure B: For materials with potential surface films or those prone to forming skin

Procedure C: For biodiesel blends and other specified fuel mixtures

Другие товары поставщика

	Office Chair Caster Durability meter	Implementation standards GB/T4085 EN425 Product features 1. The instrument adopts PLC touch screen control, simple and intuitive operation; 2. ...
	Salt Spray Testing Machine	Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chamber is one of the artificial climate environmental “...
	Metal Wire Repeated Bending Tester	Meet the standard GB/T 238-2013 "Metal material wire repeated bending test method" GB/T 235 "Metal material thickness is less than or equal to 3m...
	Plastic Smoke Density Tester F313	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific optical density of smoke generated during the comb...
	Quilting Products Combustion Rate Tester	Fire hazards exist everywhere in our daily life. In order to reduce fire accidents due to the flame spread of flammable materials and thus decrease...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...