Spring Testers and Testing Machines

The Spring Tension and Compression Testing Machine is designed to accurately evaluate the tensile and compressive deformation, as well as the load characteristics of springs and other elastic devices. With precise control of load, deformation, and displacement, the instrument ensures high-precision measurements. It is suitable for testing springs, rubber components, reeds, and other elastic elements under specified working lengths, providing critical data for quality control, research, and development.

Application

(1) Testing tensile and compressive characteristics of metal springs.

(2) Measuring the deformation and load properties of rubber components.

(3) Evaluating reed and other elastic device performance.

(4) Quality control in spring manufacturing.

(5) Verification of spring performance in automotive suspension systems.

(6) Aerospace component testing to ensure resistance to extreme forces.

(7) Medical device spring testing to meet safety and performance standards.

(8) Product development and design optimization for elastic devices.

(9) Ensuring consistent spring performance in mass production.

Standards

(1) ISO 10243 – Metallic springs – Spring testing methods.

(2) EN 13597 – Springs – Determination of tensile and compression properties.

(3) JB/T 7796-1995, JB/T 7796-2005 – Spring tensile testing machine test methods.

(4) GB/T 13634 – Calibration of dynamometers for testing machines.

(5) JIS B7738-1993 – Spiral spring pressure and tension testing machine.

Features

(1) Accurate Measurement: High-precision force and displacement measurement.

(2) Versatile Force Range: Supports 1%–100% of full scale.

(3) Adjustable Test Speed: 0.5–500 mm/min to accommodate various spring types.

(4) Comprehensive Displacement Control: 170 mm stroke for standard spring sizes.

(5) Multi-Unit Measurement: Supports N, kgf, lbf, and ozf.

(6) Quality Assurance: Enables rigorous testing for production quality control.

(7) Design Support: Provides critical data for R&D and product optimization.

(8) Wide Industry Application: Suitable for automotive, aerospace, medical, and general industrial springs.

Parameters

Parameter	Specification
Force measurement range	1%–100% FS
Test speed	0.5–500 mm/min
Displacement stroke	170 mm
Spring free length	170 mm
Disc diameter	50 mm
Measurement units	N, kgf, lbf, ozf
Power supply	AC 220V ±10%, 50Hz
Operating temperature	20 ±10℃
Transport temperature	-27℃ to +70℃

Accessories

(1) Host machine

(2) Load cells and fixtures

(3) Clamps for tensile and compression testing

(4) Control panel and display interface

(5) Power supply cable

(6) User manual

Test Procedures

(1) Install the spring or elastic component securely in the appropriate fixture.

(2) Select the measurement mode (tension or compression) and set the test parameters, including load range, displacement, and speed.

(3) Start the test; the machine will apply load and record deformation and force data automatically.

(4) Monitor the measurement display during testing to ensure correct operation.

(5) After completion, stop the machine and remove the tested component carefully.

(6) Record test results and compare with specifications to evaluate spring performance.

(7) Repeat testing if multiple samples or different load conditions are required.

Maintenance Information

(1) Regularly inspect fixtures, load cells, and moving components for wear or damage.

(2) Lubricate guide rails and mechanical parts as recommended by the manufacturer.

(3) Clean the testing area and components after each test to remove debris.

(4) Check electrical connections and control systems periodically to ensure safety.

(5) Store the machine in a clean, dry environment when not in use.

(6) Follow operational safety procedures to prevent injury during testing.

Другие товары поставщика

	Dry and Wet Retroreflectometer	Standards EN ISO 20471:2013 ANSI/ISEA 107-2015 GB 20653-2006 GB/T 18833 Main uses Dry and wet sand abrasive wear testing machine is mainly us...
	Spectrophotometer tester	Standard CIE No.15. ISO 7724-1: Meets international colorimetry and spectral measurement standards. ASTM E1164. DIN 5033: Compliant with industri...
	Carpet Static Electricity Tester	Test Principle When a person walks on the inspected carpet wearing the shoes specified in the standard and following the prescribed walking patter...
	Metal Wire Repeated Bending Tester	The Metal Wire Repeated Bending Tester is designed to evaluate the bending fatigue performance of metal wires under repeated stress. It measures th...
	Cleveland Open Cup Auto Flash Point Analyser, ISO2592，auto ignition flash point equipment	Products: The instrument complies with ISO2592 "petroleum products of flash and fire assay (Cleveland open cup)," the other standard methods, the ...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...