Sauce Packet Pressure Testing Instrument
The pressure resistance tester for sauce packets is a device specifically designed to test the pressure - resistance performance of soft packaging materials such as sauce packets.
Applications
The main purpose of the pressure resistance tester for sauce packets is to evaluate the ability of soft packaging materials like sauce packets to withstand pressure during transportation, storage, and use. By simulating the pressure conditions in the actual environment, the tester can detect whether the sauce packets will burst or leak under pressure, thus ensuring the safety and integrity of the products. This is of great significance to the food industry, as a damaged sauce packet may lead to product contamination, spoilage, or waste, which in turn affects consumers' purchase intention and brand reputation.
Standards
The design and manufacture of the pressure resistance tester for sauce packets usually comply with a series of national and international standards to ensure the accuracy and reliability of test results. These standards may include, but are not limited to:
- Relevant packaging pressure - resistance strength test standards such as GB/T 10004. These standards specify the test methods for the pressure - resistance performance of packaging materials, specimen preparation, test conditions, etc.
- Specific food packaging safety standards, such as the safety standards for food - contact materials, to ensure that the products will not be contaminated or endangered during the testing process.
Features
1. Multi-station synchronous testing: Standard configuration includes a 6-station testing station, capable of testing 6 samples at a time. Customization with additional stations is supported to meet the sampling inspection needs of large-scale production scenarios. A condiment company reported that after using this instrument, the testing time for a single batch was reduced from 2 hours to 20 minutes, a 6-fold increase in efficiency.
2. High-precision sensor system: Employs a 0.1-level precision sensor, supporting multi-range switching (e.g., 0-500N, 0-1000N), accurately capturing minute pressure fluctuations. For example, when testing 0.1mm thick aluminum foil composite film, the instrument can still distinguish a frictional force difference of 0.01N.
3. Intelligent operation and data management: The 7-inch touchscreen supports four-level access control to prevent accidental operation; test data is automatically stored and tamper-proof; a built-in micro-printer can generate reports with one click, complying with GMP and FDA regulations. Optional computer communication software enables data traceability, audit trails, and electronic signature functions.
4. Full-scenario adaptability: Supports pressure testing (simulating stacking pressure) and burst strength testing (determining ultimate pressure resistance), covering the entire life cycle of sauce packets from production to consumption.
Technical Parameters
| Technical Parameter | Specification |
|---|---|
| Test Pressure Range | Usually adjustable within a certain range, such as from 0.1 MPa to 0.7 MPa (equivalent to a pressure of 1 - 50kg) to adapt to different sauce packets and test requirements. |
| Test Time | Can be set according to actual needs, usually with a wide adjustment range, such as from 1 second to hundreds of thousands of seconds. |
| Specimen Size | Generally suitable for specimens of certain sizes, and the specific size range may vary depending on the device model. In actual testing, appropriate cutting or adjustment is required according to the size and shape of the sauce packets. |
| Control System | Modern pressure resistance testers for sauce packets usually adopt advanced control systems, such as micro-computer control or PLC control, to achieve automated operation and precise control. These systems usually have a user-friendly interface and easy-to-operate functions, such as pressure adjustment and data recording. |
| Data Recording and Analysis | Usually equipped with a data recording system and analysis software, which can automatically record data such as pressure changes and specimen deformation during the test and generate detailed test reports. This data can be used for subsequent product quality analysis and improvement. |
| Safety Devices | Usually equipped with various safety protection devices, such as emergency stop buttons and overload protection. These devices can quickly cut off the power supply or stop the test in case of an emergency to prevent equipment damage or personal injury. |
Accessoriess
1. Multi-size sample clamps: Adaptable to sauce packets of different sizes and shapes, ensuring stable sample fixation during testing;
2. Spare pressure sensor: Used for replacement in case of sensor failure, ensuring the accuracy of pressure test data;
3. Calibration standard weights: Auxiliary equipment for periodic calibration of pressure parameters to maintain test accuracy;
4. Data transmission cable: Connects the instrument to a computer for exporting and storing test data;
5. Sample protective pad: Placed between the sample and the clamp to prevent scratches on the surface of the sauce packet during testing;
6. Spare emergency stop button: A spare part of the emergency protection device, improving equipment safety.
Test Procedures
1. Sample Preparation
Prepare the sauce packet sample according to the specified size and shape, ensuring the sample surface is flat and undamaged.
2. Instrument Settings
Set the test parameters of the pressure resistance tester according to the test requirements, such as test speed and test pressure.
3. Test Procedure
Place the sample on the test platform and start the instrument. During the test, the instrument will gradually increase the pressure until the sauce packet ruptures or reaches the set maximum pressure value. The instrument will automatically record and calculate the pressure resistance of the sauce packet.
4. Data Recording
After the test is completed, record and save the pressure resistance value for subsequent analysis and comparison.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Ultraviolet Aging Testing Chamber | Equipment Description This test equipment is designed to simulate the sunlight and cause the damage of the sun's ultraviolet light, by exposing th... |
 |
Cleanliness Analysis System | The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. QV11111. as w... |
 |
Multiphase High - temperature and High - pressure Explosion Limit Tester | Reference Standards: EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A Product Features: 1. Designed with a modular concept to flexibly meet various... |
 |
Syringe needle flow tester | The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a spe... |
 |
Protective Clothing Resistance Tester | Related Standards GB/T 22042 - 2008 Clothing - Anti-static Performance - Test Method for Surface Resistivity GB/T 22043 - 2008 Clothing - Anti-st... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
