Nanofiber electrospinning device

• 

The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easily produce nanofibers with diameters of 50 to 800 nm. This device is widely used in the automotive industry for research and development of filters and fuel cells.

The Nanofiber Electrospinning Unit is capable of producing 50 to 800 nm diameter fibers. The device’s biggest feature is the ability to produce nanofibers easily from a small amount of various polymers using an electrospinning technique. Currently, use of nanofibers in raw materials, IT, biotechnology, and healthcare industries is expected to increase dramatically as manufacturers look to take advantage of increased surface area and finer fiber materials.

Standard:

T/YNIA 017-2023 "Electrospun Nonwoven Air Filter Materials"

Main features:

Spinning high uniform, high quality nanofibers

By constructing a stable electric field using our unique technology, nanofibers with high fiber diameter uniformity and a small number of droplets can be spun.

1. Ten-key easy programming

High pressure, solution volume, feed speed, syringe diameter, collector rotation speed, spinneret width, lateral speed, cleaning frequency/interval and other parameters can be easily programmed using ten keys.

2. Easy to load and unload system components

Both spinnerets and collecting plates can be replaced and installed quickly and easily.

3. Rotate the highly oriented orientation film

With the optional φ20 0mm drum dust collector or disk dust collector, highly oriented films can be produced (orientation angles of 5 degrees or less depending on the material)。

4. Equipped with automatic cleaning mechanism

Equipped with needle cleaning mechanism, frequency and interval can be programmed.

5. Thorough security measures

Thorough safety measures such as door interlock, emergency stop function, indicator light, tempered glass, high speed cut-off high pressure.

Technical parameters:

Другие товары поставщика

	Catheter Mechanical Strength Measuring System	Product Introduction The Urinary Catheter Strength Tester is designed to determine the physical strength characteristics of urinary catheters, ser...
	Contact heating and cooling test device	The sensation of coldness or warmth when skin touches a fabric is referred to as the "coldness and warmth feeling." The feeling of coldness or warm...
	Liquid Sustained Combustion Tester	This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L.2: Sustained Combusti...
	Coating abrasion resistance tester	Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met...
	Minimum Ignition Energy (MIE) – Dust Cloud Tester	Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be tested into the Hartmann tube device through a certain pr...

Похожие товары

	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Продавец: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Продавец: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Продавец: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Продавец: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...