Rupture strength tester
Standard
- IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing
- UL 61730: Safety Standard for Photovoltaic Modules
- CE Certification(Conformité Européenne)
Product Advantages
- Ultra-Wide Pressure Range
- 250–5,600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.
- 0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.
- Precision Engineering
- 5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.
- Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.
- Safety First
- Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5,600 kPa.
- Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.
- User-Centric Design
- 7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.
- Voice-Guided Setup: Step-by-step audio prompts for operators.
- Data Integrity
- Built-In Printer: Generates ISO 17025-compliant test certificates on-site.
- SD Card Logging: Exports pressure-time curves for R&D analysis.
Product Features
- Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.
- Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.
- Self-Calibrating System: Auto-tare and linearity checks before each test.
- Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.
- Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.
Technical Parameters
| Parameter | Specification |
|---|---|
| Pressure Range | 250–5,600 kPa (36–812 psi) |
| Resolution | 0.01 kg/cm² (1.42 psi) |
| Holding Pressure | 5 kg/cm² (71 psi) adjustable |
| Air Source | 6 kg/cm² (87 psi) min (customer-provided) |
| Control Accuracy | ±1% FS (full scale) |
| Power Supply | 220V AC, 50/60Hz (single-phase) |
| Dimensions | 560mm (W) × 470mm (D) × 550mm (H) |
| Weight | 60 kg (net) |
Accessories Included
- Testing Kit:
- 1x Specialized Clamping Fixture (for 2–20 mm modules).
- 2x High-Temperature Rubber Membranes (300°C rated).
- 5x Aluminum Foil Calibration Discs.
- Consumables:
- 1x 85% Glycerin Solution Bottle (for hydraulic calibration).
- 10x Disposable Dust Filters.
- Documentation:
- Multilingual Quick-Start Guide (printed + digital).
- Compliance Certificates for IEC/UL Standards.
- Safety Gear:
- 2x Safety Goggles (ANSI Z87.1 rated).
- 1x Emergency Pressure Release Key.
在线联系供应商
Other supplier products
 |
Photovoltaic module wire tube bending testing machine | Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Euro... |
 |
Gas Oxidizing Property Tester | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylinder Valve Exhaust Ports by Determination of Combu... |
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu... |
 |
10kN Universal Testing Machine | Product Introduction The electronic universal testing machine is a classic and practical model developed by our company, and it is also the mainst... |
 |
Surface Flammability Tester | Standards: 1. GB/T 8745-2001《textile Combustion performance fabric surface burning time measurement》 2. ISO 10047:1993《textile fabric surface bur... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | 卖方: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | 卖方: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | 卖方: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | 卖方: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | 卖方: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
