800L Water Cooled Xenon Lamp Testing Chamber
Water Cooled Xenon Lamp Testing Chamberis used to determine the color fastness and aging to sunlight, weather resistance, compound color fastness to sunlight-perspiration of Geotextile, leather, leatheroid, plastic, etc, by setting various parameters of irradiance, temperature, humidity, spray to simulate natural condition in lab. Be able to control irradiance real-time, automatically inspect and compensate irradiance, temperature, humidity.
Features
1.Presetting various specifications,Custom program capability, meet diverse range of standards, including AATCC, ISO, BS, JIS etc;
2.Colorful touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance, temperature (BPT, BST, chamber), humidity, and plot dynamic curve of them. The operator simply selects the required test module and test standards; English user interface, diagram indicate condition of chamber, easy to use;
3.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
4.Chamber temperature control, irradiation temperature, and heater raise the temperature, air conditioning refrigeration.
5.Custom program capability and storage for additional user-defined tests.
6.Built-in diagnostics and warnings,automatic prompt when lamp or optical filters require changing. Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably;
7.Usedriving clutch to connect turntable and motor, it makes turntable rotate freely and put sample easily without stopping unit;
Technical parameters
Xenon lamp technical parameters temperature range RT ℃ ~ +80 ℃ light irradiance
Spectral wavelength: 290nm ~ 800nm Irradiation range of 550W ~ 1200W / ㎡,
Temperature fluctuation ≤ ± 0.5 ℃
Temperature uniformity ≤ 2 ℃
Cooling rate 0.7 ~ 1 ℃ / min (non-linear)
Heating rate 3 ~ 5 ℃ / min (non-linear)
Humidity range 30% ~ 98% R.H
Humidity fluctuates 3% to 4% R.H
Blackboard temperature 63 + 3 ℃
Material
Outer box material, size high quality cold rolled steel plate paint deep 1400 * wide 1450 * high 1950mm
Inner box material, size imported SUS304 stainless steel deep 800 * wide 800 * high 800mm
Insulation material quality polyurethane foam 100mm
Xenon light source water-cooled xenon lamp 6KW, life of more than 1200 hours, easy to disassemble
Light Irradiance Deviation ± 0.01W / m2
High radiation intensity control can reach 2 sun or higher levels
Другие товары поставщика
|
|
G645 leather shoe hook stiffness testing machine |
Product Introduction:
Leather shoe hook stiffness tester is suitable for measuring the longitudinal bending stiffness of leather shoe hook. The pr... |
|
|
Total Knee Joint Prostheses Wear Tester |
Standard
ISO 14243-1:2014: Specifies wear testing parameters for total knee prostheses, including axial loading, flexion/extension kinematics, and... |
|
|
Safety shoe impact tester |
According to the criteria
Bs-953.1870
EN-344.
ANSI-Z41
CSA-Z195
ISO K88782
EN ISO 20344.
ANSI-Z41
BS EN-344
CSA-ZI95
LD50-1994
AS/NZS 22... |
|
|
Cleveland Open Cup Flash Point Tester |
The instrument can automatically test the flash point and ignition point of petroleum products (the ignition point of oil exceeding 80 ° C, exc... |
|
|
UV Accelerated Weathering Tester |
Standard：
ASTM D4329、ASTM D4587、ASTM D4799 、ASTM D5208、ASTM G151、ASTM G154 、EN 927-6、EN 1297 、EN 1898 FIBC、EN 12224 、EN 13523-10 、ISO 4892-1、ISO 4... |
Все товары поставщика
Похожие товары
