800L Water Cooled Xenon Lamp Testing Chamber
Water Cooled Xenon Lamp Testing Chamberis used to determine the color fastness and aging to sunlight, weather resistance, compound color fastness to sunlight-perspiration of Geotextile, leather, leatheroid, plastic, etc, by setting various parameters of irradiance, temperature, humidity, spray to simulate natural condition in lab. Be able to control irradiance real-time, automatically inspect and compensate irradiance, temperature, humidity.
Features
1.Presetting various specifications,Custom program capability, meet diverse range of standards, including AATCC, ISO, BS, JIS etc;
2.Colorful touch screen, indicate the condition of chamber at real-time, be able to presetting irradiance, temperature (BPT, BST, chamber), humidity, and plot dynamic curve of them. The operator simply selects the required test module and test standards; English user interface, diagram indicate condition of chamber, easy to use;
3.PLC control, powerful program and storage property, save the parameters when interrupt of power supply.
4.Chamber temperature control, irradiation temperature, and heater raise the temperature, air conditioning refrigeration.
5.Custom program capability and storage for additional user-defined tests.
6.Built-in diagnostics and warnings,automatic prompt when lamp or optical filters require changing. Multi-position sensor to supervise working condition, temperature, humidity, fan, xenon lamp, and door to chamber, it makes device work properly and reliably;
7.Usedriving clutch to connect turntable and motor, it makes turntable rotate freely and put sample easily without stopping unit;
Technical parameters
Xenon lamp technical parameters temperature range RT ℃ ~ +80 ℃ light irradiance
Spectral wavelength: 290nm ~ 800nm Irradiation range of 550W ~ 1200W / ㎡,
Temperature fluctuation ≤ ± 0.5 ℃
Temperature uniformity ≤ 2 ℃
Cooling rate 0.7 ~ 1 ℃ / min (non-linear)
Heating rate 3 ~ 5 ℃ / min (non-linear)
Humidity range 30% ~ 98% R.H
Humidity fluctuates 3% to 4% R.H
Blackboard temperature 63 + 3 ℃
Material
Outer box material, size high quality cold rolled steel plate paint deep 1400 * wide 1450 * high 1950mm
Inner box material, size imported SUS304 stainless steel deep 800 * wide 800 * high 800mm
Insulation material quality polyurethane foam 100mm
Xenon light source water-cooled xenon lamp 6KW, life of more than 1200 hours, easy to disassemble
Light Irradiance Deviation ± 0.01W / m2
High radiation intensity control can reach 2 sun or higher levels
Other supplier products
|
|
Single - Strand Bending Tester STD - FB2 - SH |
Standards
ASTM A370. ASTM A416. ISO6934.4
The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, ... |
|
|
Mask respiratory resistance tester |
The Mask Respiratory Resistance Tester is designed to measure the inhalation and exhalation resistance of respirators and masks under controlled co... |
|
|
Blood Bag Emptying under Pressure Tester |
The Blood Bag Emptying Under Pressure Tester is suitable for testing the pressurized emptying of single-use plastic blood bags and blood collection... |
|
|
Bone Cement Four-Point Bending Fatigue Tester |
Standard
YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading.
ISO ... |
|
|
Bending Test device |
Compliance Standards
ASTM D790 (Plastics Flexural Properties)
ISO 178 (Flexural Strength of Rigid Plastics)
SAE J2748 (Automotive Composite Flex... |
All supplier products
Same products
