.

UV Sterilizer

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Product introduction of Environmental test chamber

Ultraviolet disinfection technology is the latest generation of disinfection technology emerging in the late 1990s. It integrates optics, microbiology, electronics, fluid mechanics, and aerodynamics. It has the characteristics of high efficiency, broad spectrum, low cost, long life, large water volume, and no secondary pollution. It is internationally recognized in the 21st century. Mainstream consumer technology.

Advantages of UV disinfection technology

The disinfection effect of ultraviolet C disinfection technology on bacterial viruses and other pathogens has been recognized worldwide, and it has unparalleled bactericidal efficiency. The germicidal effect of ultraviolet rays on bacteria and viruses is generally within one second. For traditional chlorine and ozone methods, it takes 20 to 50 minutes to achieve the sterilization effect of ultraviolet rays. It has a broad spectrum of efficient sterilization, no secondary pollution, safe and reasonable design, safe and reliable operation. Simple maintenance and low cost. This equipment occupies a small area and has no noise. Continuous mass sterilization. Wide application fields and many other advantages

Product parameters

1. Total equipment length: 2000mm

2. Working area length: 1000mm

3. Feeding operation area: 500mm Discharging operation area: 500mm

4. Height of entrance and exit: 200mm

5. Conveyor width: 500mm

6. Conveyor belt from the ground: 750 ± 20mm

7. A total of 16 lamps are installed in the sterilizer, each power: 20W)

Product main configuration and structure

1. Work area tunnel body:high-quality 304 screen stainless steel

2. Working area tunnel cavity: mirror stainless steel Model: # 304

3. Body support frame: one set of Fangtong Steel Model: 2 ″ Fangtong

4. Air transport system: a set of forced air transport exhaust fans (extracting harmful gas) Model: 6 inches

5. Thermal insulation material: Vacuum aluminum silicate + silk cotton double layer Model: 60K

6. Conveyor belt: Teflon mesh belt 1. Main switch: 20A

7. Transport motor: 800W (inverter speed regulation)

8. Speed ​​governor: 500W (electronic stepless inverter speed regulation digital display speed operation)

9.Exhaust fan: CY-125

10. Ammeter: 50A set

11.Voltmeter: 220V one set

12. Working voltage: 200V--220V (± 5) Three-wire system 50Hz

Effective light moment of ultraviolet light source: 150mm

Tube length 460mm

16 UV germicidal lamp tubes * 20W UV lamps are located in the inner cavity longitudinally, and are installed on the top, bottom, left and right

The wavelength is 253.7nm, and the radiation intensity at a distance of 1 meter is more than 160 microwatts per square centimeter. Life is 8000 small


Отправить запрос, связаться с поставщиком

Кому: Standard International Group (HK) Limited
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Gas Explosion Limit Tester,UL9540A
Gas Explosion Limit Tester,UL9540A Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The explosion limit tester can realize the explosion limit measurement of com...
Micro-hole Detection Instrument
Micro-hole Detection Instrument Whats/App: +86 156 1874 6768 Web: standard-groups.com The pinhole tester for aluminum foil is a device specifically used to detect micro - pinhol...
Bus seat tester for safety and durability testing
Bus seat tester for safety and durability testing Whats/App: +86 156 1874 6768 Web: standard-groups.com Applicable Test Standards NHTSA S5.1.3 – Seat Structural Strength Testing NHTSA S5....
Minimum Ignition Energy (MIE) – Dust Cloud Tester,CE certified dust cloud ignition tester
Minimum Ignition Energy (MIE) – Dust Cloud Tester,CE certified dust cloud ignition tester Whats/App: +86 156 1874 6768 Web: standard-groups.com Dust Cloud Minimum Ignition Energy Tester disperses a certain mass of dust specimen to be t...
Fire Resistance Test Furnace for Building Materials
Fire Resistance Test Furnace for Building Materials Whats/App: +86 156 1874 6768 Web: standard-groups.com The building materials flammability testing furnace is a testing instrument prepared accord...
Все товары поставщика

Похожие товары

Full-Body Garment Stress Tester,FZ/T 70015
Full-Body Garment Stress Tester,FZ/T 70015 Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
Industrial Dry Cleaning Machine,industrial garment steamer
Industrial Dry Cleaning Machine,industrial garment steamer Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
MST Medical Compression Stocking Tester,compression sock tester
MST Medical Compression Stocking Tester,compression sock tester Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
Dental material color stability tester
Dental material color stability tester Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...