Mechanical load testing machine for photovoltaic modules

Whats/App: +86 156 1874 6768

Web: standard-groups.com

The Mechanical Load Testing Machine for Photovoltaic Modules is engineered to evaluate the mechanical durability of both crystalline and thin-film PV modules under static and dynamic load conditions. By simulating snow, wind, hail, and debris impacts, the system ensures modules meet international mechanical reliability standards. It is suitable for R&D, quality assurance, and certification laboratories.

Application

Static and dynamic mechanical load testing of crystalline PV modules (framed/frameless).

Fatigue testing under pulsating wind or snow load conditions.

Hail and debris impact simulation for module safety evaluation.

Research and development for thin-film PV modules and flexible panels.

Standards

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

IEC 62782: Dynamic Mechanical Load Testing for Photovoltaic Modules

UL 1703: Flat-Plate Photovoltaic Modules and Panels

CE Certification (Conformité Européenne)

Features

Multi-Standard Compliance: Simulates forward/reverse loads and dynamic fatigue cycles according to IEC standards.

Ultra-Precise Control: 0.1 N force feedback and ±5% pressure accuracy for reproducible results.

Automated Testing: Programmable cycle counts with AI-assisted real-time crack detection via EL imaging.

Safety First: Dual redundant emergency shutoff, load cell override, and overload protection at 6,000 Pa.

Modular Design: Quick-change fixtures accommodate framed, frameless, and flexible modules; expandable test area up to 3.0m × 2.0m.

User-Friendly Operation: 10” touchscreen HMI with preloaded IEC/UL test sequences and customizable pressure profiles.

Robust Construction: 304 stainless steel frame with epoxy coating ensures long-term durability.

Remote Monitoring & Self-Calibrating: Wi-Fi/Ethernet connectivity and auto-tare/linearity checks before each test.

Parameters

Parameter	Specification
Test Area	2.8m (L) × 1.8m (D) × 1.95m (H)
Forward Load	5,400 Pa (adjustable)
Reverse Load	2,400 Pa (adjustable)
Dynamic Load	1,000 Pa, 1,000 cycles (7s+3s timing)
Pressure Accuracy	±5% of setpoint
Force Sensor	0.1 N resolution, 10 kN capacity
Power Supply	230V AC, 50/60Hz (single-phase)
Air Supply	6–8 bar (clean/dry air required)
Weight	1,200 kg (net) / 1,500 kg (gross)

Accessories

Testing Kit: 4x PV module clamping fixtures (adjustable for 16–40 mm frames), 10x load distribution pads (anti-skid rubber)

Software Suite: License key for LoadTest Pro (Windows/Linux), 1-year free access to cloud-based fatigue analysis tools

Calibration & Safety: NIST-traceable pressure gauge, safety harness kit for large modules

Maintenance Kit: Spare O-rings and cylinder seals, machine cleaning solution (non-corrosive)

Documentation: Multilingual quick-start guide (printed + digital)

Test Procedures

Mount PV modules securely on the clamping fixtures.

Select the desired test profile on the touchscreen HMI (forward/reverse load or dynamic cycle).

Set the number of cycles and load parameters according to IEC/UL standards.

Start the test and monitor pressure and force readings in real-time.

Inspect modules after test completion using EL imaging for crack or delamination detection.

Export test data and generate a standardized report for QA or certification purposes.

Maintenance Information

Regularly inspect cylinders, O-rings, and load distribution pads for wear.

Clean the frame and fixtures to prevent dust accumulation.

Verify force sensor calibration periodically using NIST-traceable standards.

Check air supply quality (clean/dry) to ensure consistent pneumatic operation.

Test emergency shutoff and overload protection circuits monthly.

Другие товары поставщика

	Button Impact Tester丨Button Impact Test mechine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards ASTM D5171 Applications Button Impact Tester is used to determine the impact r...
	Horizontal fire resistance test furnace for building materials supplier	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application Building Fire Resistance Testing Fire resistance evaluation of horizontal str...
	Laboratory Spring Mechanical Testing System ASTM International	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards (1) ISO 10243 – Metallic springs – Spring testing meth...
	EN 50306 Railway Locomotive Cable Dynamic Cut-through Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Railway Locomotive Cable Dynamic Cut-through Tester is designed to evalua...
	Intervertebral Fusion Cages Shear Fatigue Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 0959-2014 (China): Specifies shear fatigue testing protocols for interverteb...

Все товары поставщика

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...