Rubber hose outer coating wear testing machine

The Rubber Hose Outer Coating Wear Testing Machine is a precision laboratory and production testing instrument designed to evaluate the abrasion resistance of rubber and thermoplastic hose outer coatings. It is suitable for hoses reinforced with fabric or steel wire and featuring smooth, flat surfaces. By applying a controlled reciprocating motion with a defined vertical load, this machine simulates real-world wear conditions experienced by hydraulic, automotive, and industrial hoses, providing accurate and reproducible data for quality control, R&D, and material performance evaluation.

Applications

(1) Hydraulic hoses: Rubber hoses with smooth, flat outer coatings reinforced with fabric or steel wire.

(2) Industrial hoses: Air, water, and chemical hoses with similar outer coating structures.

(3) Automotive hoses: Brake lines, fuel lines, and coolant hoses.

(4) Testing laboratories: Quality control and research for abrasion resistance of hose coatings.

(5) Material evaluation: Suitable for rubber, thermoplastic, or composite hose cladding.

Standards

(1) GB/T 12721-2007 — Determination of abrasion resistance of rubber hose outer coating

(2) ISO 6945:1991 — Rubber hoses — Determination of abrasion resistance of cladding

(3) KS M ISO 6945-2013 — Determination of abrasion resistance of the outer coating of rubber hoses

(4) EN ISO 6945-1996 — Determination of abrasion resistance of rubber hose outer coatings

(5) DS/ISO 6945-1984 — Determination of wear resistance of rubber hose cladding

Features

(1) High reproducibility: Provides consistent and accurate abrasion testing of rubber hose outer coatings.

(2) Versatile mandrel sizes: Supports a wide range of shaft diameters to accommodate different hose types.

(3) Adjustable load: Vertical static pressure can be set according to the product standard or customized.

(4) Simulates real-world wear: Reciprocating motion reproduces the friction and wear that hoses experience in operation.

(5) Easy operation and setup: Simple installation of hose samples and abrasive tool ensures quick test preparation.

Technical Parameters

Item	Specification
Reciprocating frequency	1.25 Hz (45 RPM)
Cycle stroke	200 mm
Loading static pressure	50 N ± 0.5 N (customizable)
Mandrel length	150 mm
Shaft diameters	5, 8, 10, 13, 16, 19, 22, 25, 32, 38, 45, 51 mm (3 selectable, or customized)
Power supply	AC 220V, 50/60 Hz (typical)

Accessories

(1) Main testing machine ×1

(2) Standard mandrels (3 selectable sizes) ×1 set

(3) Abrasive tool ×1

(4) Weights for loading pressure ×1 set

(5) Power cable ×1

(6) Instruction manual ×1

Test Procedure

(1) Install the assembled hose sample and mandrel on the test device, ensuring no axial movement or rotation.

(2) Position the abrasive tool in contact with the sample and apply the vertical static pressure F specified by the standard (or 50 N ± 0.5 N if unspecified).

(3) Start the machine and allow it to run until the required number of cycles is completed.

(4) Remove the sample assembly, clean off any debris or particles from the outer coating, and weigh the sample (with or without core shaft) to compare with initial weight.

Maintenance Information

(1) Regularly clean the abrasive tool and test mandrels to remove rubber debris.

(2) Inspect the reciprocating mechanism and bearings periodically for smooth operation.

(3) Check calibration of applied load weights to ensure consistent static pressure.

(4) Lubricate moving parts according to the manufacturer’s recommendations.

(5) Store the machine in a clean, dry environment when not in use.

Другие товары поставщика

	Electrode tortuosity tester & diaphragm ion conductivity tester	The Electrode Tortuosity Tester and Diaphragm Ion Conductivity Tester are precision systems designed for advanced analysis of battery electrodes an...
	Electrical Pencil Hardness Testing Device (for Electric pencil hardness tester)	Product Introduction: This machine is suitable for all kinds of finished product spray hardness test, such as: mobile shell, laptop computer shel...
	Electrochemical Corrosion and Wear Testing Machine	Electrochemical corrosion and wear testing machines are widely used in materials science, mechanical engineering, electronic engineering, aerospace...
	Single - Strand Bending Test device	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to easily measure and quantify softness, elasticity, ...
	Thermal Radiation Flooring Combustion Tester	Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi...

Все товары поставщика

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...