Syringe needle flow tester

The Syringe Needle Flow Tester is designed to evaluate the flow characteristics of syringes by measuring the volume of liquid discharged over a specified time. It provides accurate and reproducible results for quality control, research, and development of syringes, anesthetic puncture kits, and pre-filled injection systems. The device integrates a test body, syringe fixture, flow meter, and control system for precise testing.

Application

This tester is suitable for a wide range of medical devices, including:

(1) Disposable anesthetic syringes – testing flow rate consistency for anesthesia delivery.

(2) Pre-filled syringes – ensuring accurate dosing and uniform liquid discharge.

(3) Standard hypodermic syringes – assessing flow characteristics for various liquid viscosities.

(4) Infusion needles – evaluating needle performance under different pressures.

(5) Catheter-mounted syringes – verifying flow rate for precise medical application.

(6) R&D and production line quality control – confirming syringe compliance with standards.

Standards

The instrument is designed to meet the following standards:

(1) YY 0321.1: Disposable anesthetic puncture kit (China)

(2) YYB: Stainless steel injection needle for pre-filled and sealed syringes (China)

Optional compliance with international standards:

(3) ISO 7886-1: Sterile hypodermic syringes – Part 1

(4) ISO 8537: Single-use sterile needles and syringes

Features

(1) Measures syringe flow rate accurately over a fixed time interval.

(2) Integrated control system for precise pressure and flow management.

(3) Supports different syringe sizes with customizable fixing fixtures.

(4) Real-time monitoring of test parameters, ensuring reliable results.

(5) Easy-to-use interface for rapid setup and operation.

(6) Compact design suitable for laboratory or production environments.

Parameters

Parameter	Specification
Test pressure	0 – 400 kPa
Pressure resolution	0.1 kPa
Pressure accuracy	±1% FS
Air source interface	8 mm polyurethane pipe
Test interface	6% Ruhr connector (customizable)
Host dimensions (L × W × H)	325 × 420 × 170 mm

Accessories

(1) Test body – 1 set

(2) Syringe fixing device – 1 set

(3) Flow meter – 1 set

(4) Control system – integrated

(5) Operation manual – 1 set

(6) Optional connectors and adapters for different syringe types

Test Procedures

(1) Secure the syringe in the fixing device according to its nominal size.

(2) Connect the air source and test interface.

(3) Set the test pressure and duration on the control system.

(4) Start the test; the device will measure the volume of liquid discharged over the specified time.

(5) Record the flow rate data and analyze results for compliance.

Maintenance Information

(1) Keep the device clean and free from liquid or dust ingress.

(2) Inspect the flow meter and syringe fixtures regularly to ensure accurate readings.

(3) Avoid exposing the device to excessive humidity, vibration, or temperature fluctuations.

(4) Calibrate pressure sensors periodically to maintain accuracy.

(5) Follow standard electrical safety guidelines during operation.

Другие товары поставщика

	Initial Adhesion Tester	The initial - tack tester, also known as the initial - tack property tester or adhesive tape tackiness tester, is an instrument specifically used t...
	Fiber Blend Ratio Tester	The Fiber Blend Ratio Tester is designed to measure the electrical resistance of a compacted fiber sample and convert it into the specific resistan...
	Photovoltaic module damp heat test chamber	The Photovoltaic Module Damp Heat Test Chamber is designed to simulate long-term tropical aging conditions for photovoltaic modules and related ele...
	Cylindrical Battery In-Situ Volume Swelling Testing System	The Cylindrical Battery In-Situ Volume Swelling Testing System is designed for real-time measurement and analysis of volume and dimensional changes...
	Safety Footwear Compression Puncture meter	Test purpose Measure the compression resistance of the shoe head cover and the puncture resistance of the steel plate to prevent the operator from...

Все товары поставщика

Похожие товары

	Gas Oxidizing Property Tester	Продавец: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Продавец: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Продавец: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Продавец: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Продавец: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...