Vertical Tray Fire Test Apparatus/UL1685/IEEE 1202

This tester is based on IEEE1202 and IEEE 383 standard design and development. This tester is used to assess single or bunched cables under defined conditions inhibit the spread of flame apparatus ability to meet UL 1685. IEEE 383 and IEEE 1202's testing requirements. UL flame contact test is a vertical flame teststand,when the cable is subjected to shock and burning fire source, the cable damage height and decided to test the value of smoke emission. We meet the UL testing procedures cable is accepted this device can be used to evaluate the assessment of single cable or multicore cable flame spread situation. In this device can also increase gas analysis HRR (heat release rate), smoke density and other means for analyzing the test material.

Standard:

• UL1685

• IEEE 1202

- Flame propagation - Wire and cable test

• IEEE 383

IE-level nuclear power cables, field connectors and connector type test standard

Main Features：

1. The test box size is 2.600 (W) x 2.600 (D) x 3.100 (H) mm, the volume is 20.28m3. internal area is 6.76m2.

2. The internal toolings are all made of stainless steel;

3. The combustion test box structure with a smoke discharge hole, there are the fresh air intake;

4. The test room walls made of concrete bricks or refractory bricks. Walls have observation window;

5. The test room containing an access gate made from steel material;

6. Two-way differential pressure sensor measuring flue gas flow rate; and import pressure sensors, pressure precision 0.025pa;

7. K-type thermocouple (Inconel) detects the temperature of the flue;

8. Cable bracket size:(300mmx76mmx2400mm);

9. The burner is formed by the ribbon propane torch andinportwick;

10. Propane flow meter: at standard temperature and pressure (20 ° C, 101 kPa) at (220 ± 8 cm3 / s);

11. Air flow meter: at standard temperature and pressure (20 ° C, 101 kPa) at (1280 ± 80 cm3 / s);

12. Thermocouple and bi-directional wind speed, which installed in the exhaust pipe, can measure exhaust temperature and gas flow rate;

13. Tray size is 305 (length) × 76 (width) × 2438 (height) mm, ladders horizontal width of 25 ± 6mm, spanning a 229mm;

14. Ribbon propane burner with a mixerVentury, which meet IEC60332-3;

15. Using the data acquisition board, accurately capture and measure the internal component temperatures and burner flame temperature;

16. Solenoid valve and ignition by button on the control panel manual control, emergency situations can turn off the power to the instrument (not including PC power supply);

Smoke density systems:

1. The smoke density analysis: beam clear shot automatic lighting system measures the smoke density; color temperature is of 2900 ± 100K, current fluctuation range of ± 0.5%; smoke density linear output with time compensation;.

2. Together into a 20mm lens parallel light beam; d / f <0.04;

3. The detector, spectral distribution corresponding to the degree consistent with CIE; color standard functions precision ± 5%; less than 1% output linearity within 3% transmittance or absolute light transmittance;

Measuring System:

1. Digital data acquisition system is used to collect and record smoke density and pressure measurement. The speed and capacity of the system is to collect data from every 5 seconds.

2. To ensure that the nominal gas flow in the pipe line is 0.65 ± 0.05 cubic meters / second.

3. Computer control system,labviewsoftware; beautiful interface, easy to operate;

Specification:

Model	STD-UL1685
Size	Internal cabinet dimensions: 2.600(W)×2.600(D)×3.100(H)mm
Console Size	600(W)×750(D)×1600(H)mm
Power	AC 220V, 50/60Hz, 15A
Weight	Approx. 500kg(chamber), Approx. 130kg(control)
Manual	Supplied
Exhaust	0.63~0.67m2/s( Measuring), Minimum 100m2 / min (extraction)
Tool	gases, personal computers, vacuum cleaners, propane gas

Другие товары поставщика

	Battery Diaphragm Gas Permeability Tester	The Battery Diaphragm Gas Permeability Tester is a precision instrument designed to evaluate the gas permeability of battery diaphragms and separat...
	Particle Abrasion meter	The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ...
	Aerosol Foams Flammability Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 31.6 Flammabi...
	Metal Wire Wrap Tester	According to the criteria: GB/T 2976 "Wire winding test method for Metal Materials" ISO 4101 Cold drawn steel wire for elevator wire ropes - Tech...
	Solid Combustion Rate Tester	Product Introduction This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 33.2.1.4 Test...

Все товары поставщика

Похожие товары

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Продавец: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Продавец: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Продавец: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Продавец: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Продавец: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...