Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1

• 

Introduction

This instrument is designed according to ISO11925-2. it is used to test building material under conditions in the absence of external radiation to direct impact of vertically placed samples with a small flame to determine the flammability of building products.

Standards

EN ISO 11925-2;

DIN 53438;

DIN4102-1;

Structure

1. Box paint treatment, beautiful;

2. The combustion chamber dimensions: length 700mm X width 400mm X high 600

3. Tthe flame height can be adjusted, automatic ignition;

4. The flame burning application time and hold time can range from 0 to 99 minutes 99secondsregulation;

5. Combustion angle: 0 ° (vertical), 45 °

6. The burner can be moved in a horizontal direction;

7. Glass doors for easy observation test;

8. All fixtures are made of stainless steel; beautiful and corrosion;

9. Equipped with two types of stainless steel sample holder. With flame height measuring;

10. High degree of test automation, test data accurate, easy to operate.

Control System

• Programmable Logic Controller (PLC) Control:

• Automatic timing, automatic detection of the flame, automatic ignition, ignition abnormal protection;

• LCD touch screen display;

• real-time monitoring of experimental data, queries six samples of experimental data, query alarm content.

Specifications

Operating Voltage: 3.3V-5V

Detection Range: 1 meter

Output:

DO interface: Digital output

AO interface: Analog output

Reading Method: ADC and digital values (0 and 1)

Pin Count: 4 (2.54mm pitch pin header)

Другие товары поставщика

	Flammability Tester	Standards •ASTM D 1230 •ASTM F 963 •ASTM F2100 •16 CFR PART 1610 Features 1.Stainless steel cabnet, beautiful, corrosio...
	Torsional Fatigue Tester	Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freque...
	Elastic Tape Fatigue Testing Machine	This instrument is used to test the elasticity of elastic belt after reciprocating movement. Application Elastic Tape Fatigue Testing Machineis u...
	Textile Leather Testing Equipment for ISO 11640	Application IULTCS Rubbing Fastness Tester, designed to carry out a rub fastness test on the surface of leather to determine the amount of ‘...
	Particle Wear Testing Machine (for Particle Abrasion Tester)	The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ...

Похожие товары

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Продавец: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Продавец: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Продавец: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Продавец: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Продавец: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...