Dry and wet state reverse reflection coefficient tester

• 

Product Information:

Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of occupational high-visibility warning materials in dry state and wet state, and to determine the reverse reflection coefficient of the sample surface. It is suitable for visible warning clothing worn by various posts to ensure the safety warning of personnel.

Technical indicators:

1, the hard plastic cover is equipped with a movable door, the cover has a square hole, the side length is 150mm;

2, the nozzle diameter is 1.19mm, the water supply pipe produces a conical stable and uniform water column;

3, nozzle distance sample 1000mm;

4, when the water column contacts the sample, it forms a （10±5） degree Angle with the surface of the sample in the vertical direction;

5, sample rack device, sample size: 150mm×150mm;

6, water spraying speed: 284mm/h;

7, time control: 0-99.99min, accuracy: 0.01min;

8, light source: standard light source A, color temperature is 2856K;

9, light detector: illuminance meter 0.01lx —— 200klx, aperture Angle δ<12 ';

10, observation Angle α : 12 '—— 2° adjustable, accuracy: 6';

11, incidence Angle β : 0° —— 40° adjustable, accuracy: 1°;

12, sample frame: can be accurately positioned in the first axis β1 and the second axis β2 orientation;

13, the light detector distance from the sample surface: 15m.

Applicable standards:

GB/T 20653-2020 "Protective Clothing Occupational High visibility Warning clothing" Appendix C Appendix E

GB/T 33536-2017 Protective clothing Forest fire protection clothing

GB/T 38046-2019 Reflective vest for car occupants

Другие товары поставщика

	Shoe bending Angle tester	Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, wit...
	Small Parts Tester	Test Procedure: 1. Place test object under its own weight into the small parts tester in multiple orientations. 2. If the object fully submerges ...
	Melt Index Tester	Main uses: The melt flow rate meter uses automatic sampling and balance weighing to determine the volume flow rate (MFR) of thermoplastic melts ac...
	Goggles Puncture Resistance Testing Machine/ eyewear penetration test equipment/ Goggle penetration tester	Introduction： In environments where eye protection is critical, goggles are a frontline defense against hazards. But how do you ensure that these ...
	Button Impact Machine	Testing Standards: ASTM D5171 Application:Button falling weight impact testeris used to determine the impact resistance of plastic sew-through fl...

Похожие товары

	Falling Sand Abrasion Test machine	Продавец: Standard International Group (HK) Limited	The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
	Conveyor Belt Drum Friction Testing Machine	Продавец: Standard International Group (HK) Limited	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
	Dry Sand Rubber Wheel Wear Tester	Продавец: Standard International Group (HK) Limited	The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
	Sliding Bearing Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...
	High temperature vacum friction & wear tester	Продавец: Standard International Group (HK) Limited	The working principle of a high-temperature vacuum friction and wear testing machine is to simula...