Dry and wet state reverse reflection coefficient tester

• 

Product Information:

Dry and wet state reverse reflection coefficient tester is used to simulate the evaluation of the reflective performance of occupational high-visibility warning materials in dry state and wet state, and to determine the reverse reflection coefficient of the sample surface. It is suitable for visible warning clothing worn by various posts to ensure the safety warning of personnel.

Technical indicators:

1, the hard plastic cover is equipped with a movable door, the cover has a square hole, the side length is 150mm;

2, the nozzle diameter is 1.19mm, the water supply pipe produces a conical stable and uniform water column;

3, nozzle distance sample 1000mm;

4, when the water column contacts the sample, it forms a （10±5） degree Angle with the surface of the sample in the vertical direction;

5, sample rack device, sample size: 150mm×150mm;

6, water spraying speed: 284mm/h;

7, time control: 0-99.99min, accuracy: 0.01min;

8, light source: standard light source A, color temperature is 2856K;

9, light detector: illuminance meter 0.01lx —— 200klx, aperture Angle δ<12 ';

10, observation Angle α : 12 '—— 2° adjustable, accuracy: 6';

11, incidence Angle β : 0° —— 40° adjustable, accuracy: 1°;

12, sample frame: can be accurately positioned in the first axis β1 and the second axis β2 orientation;

13, the light detector distance from the sample surface: 15m.

Applicable standards:

GB/T 20653-2020 "Protective Clothing Occupational High visibility Warning clothing" Appendix C Appendix E

GB/T 33536-2017 Protective clothing Forest fire protection clothing

GB/T 38046-2019 Reflective vest for car occupants

Other supplier products

	Electrochemical Corrosion and Wear Testing Machine	Introduction to Main Purposes 1. Evaluation of Material Corrosion and Wear Performance: By simulating the corrosion and friction - wear environmen...
	Fabric Wrinkle Bending Tester	The Fabric Wrinkle Bending Tester is a specialized instrument used to assess the wrinkle recovery properties of various textile fabrics. It simulat...
	Bone Screw Pull-out Tester	Standard YY/T 1506, ASTM F543: The standard specifies the torque required to measure the torque required to screw a metallic bone grafting screw ...
	Spring torsion fatigue testing machine	Product Introduction: Spring torsional fatigue testing machine （horizontal） is a new type of automatic torsional fatigue testing machine with digi...
	Shoes Sole Bending Resist Testing Machine	Applications: Bennewart Flex Tester is used to test outsole flexing resistance by flexing the outsole at a certain speed and angle. The shoe out...

Same products

	Thrust Bearing Rolling Friction and Wear Testing Machine	Seller: Standard International Group (HK) Limited	Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ...
	Falling Sand Abrasion Test machine	Seller: Standard International Group (HK) Limited	The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
	Conveyor Belt Drum Friction Testing Machine	Seller: Standard International Group (HK) Limited	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
	Dry Sand Rubber Wheel Wear Tester	Seller: Standard International Group (HK) Limited	The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
	Sliding Bearing Fatigue Testing Machine	Seller: Standard International Group (HK) Limited	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...