G612 national standard shoe wear testing machine
Все товары поставщика
The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press the rotating grinding head vertically above the sample, and carry out rotary wear test on the test sample at a certain load weight and a speed of 191r/min. After the test is completed, the wear length of the sample is measured to evaluate whether the sample is qualified.
Reference standard:
GB/T 3903.2-2017, QB/T4329-2012 and other standards
Technical specifications:
Performance: Accurate weighing, stability, good repeatability, the use of environmental requirements: at a specific temperature （23±2℃）， measuring the weight of the material and water
Speed: （191±5）r/min（adjustable）
Load: 500g（5g-500g optional）
Test time: 20 minutes （adjustable）
Grinding wheel: 20±0.1 diameter 4±0.1mm thick, T12 steel grinding wheel, with 72 teeth, tooth Angle 90°±5°, tip width 0.2±0.05mm, tip roughness Ra=3.2um, hardness HRC³55, coaxiality 0.03mm
Balance range: 5000g, accuracy: 0.5g
Volume: 560×510×830mm
Weight: 70kg
Power supply: AC220V,10A
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Footwear Dynamic Waterproof Tester | Product Introduction: It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enter... |
 |
Differential Scanning Calorimetry Tester | Scope of application: It is used to analyze the thermal effect and corresponding temperature when the physical or chemical properties of organic a... |
 |
Battery Powder Compaction Density Measurement System | Standard Engineered to comply with global testing standards (ISO 3953.ASTM B527), our Powder Tapped Density Analyzer provides certified results fo... |
 |
Filter Dynamic Cycling Tester | Filter element dynamic cycling test bench is mainly used to test the chemical element precipitation characteristics of filter element under long-te... |
 |
TEXTILE CUTTING MACHINE | Applications: Textile cutting machine, Fabric cutting machine, Cloth cutting machine, Automatic knife cutter, Straight knife cutter. Variable sp... |
Похожие товары
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Продавец: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Продавец: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Продавец: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Продавец: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
