Shoe bending Angle tester

• 

Product Introduction:

Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, with the speed of (100±10)mm/min to increase the force of 30N, observe the Angle of the bending of the outsole, according to its Angle to determine whether the product needs to enter the folding resistance test.

Reference standard:

GB/T 20991-2007 "Test methods for Personal Protective Equipment Shoes" 8.4.1 —— 4

QB/T 1002-2015 Leather Shoes 5.5.4.2

QB/T 2885-2007 "Footwear outsole test methods for folding Performance" 4.2

BS EN ISO 17707-2005

Product Advantages:

Measures Outsole Flexibility/Rigidity: Provides a quantitative assessment of how easily the outsole bends under a specific load.

Standard Compliant: Designed to meet relevant national and international standards for outsole bending stiffness testing.

Preliminary Assessment Tool: Helps determine if an outsole is suitable for more extensive dynamic flexing tests.

Quantitative Result: Provides an objective bending angle measurement at a specified force.

Controlled Test Parameters: Allows for precise control of the speed of force application and the applied load.

Easy to Operate: Relatively straightforward test procedure.

Product Features:

Clamping mechanism designed to securely hold the front part of the shoe or a section of the outsole on a hard base.

Mechanism to apply a controlled force (likely 30N) at a specific speed (100 ± 10 mm/min) to bend the outsole.

System for measuring the bending angle of the outsole when the specified load is applied.

LED digital display to show the measured bending angle.

Robust construction suitable for repetitive testing.

Technical parameters:

1. speed: 100±10/mm/min

2. load: 30kg

3. display: LED digital display

4. Volume: 67X53X65cm

5. Weight: 60kg

6. voltage: AC 220V

Другие товары поставщика

	Bone Screw Static Torque Testing Machine	Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedullary nails, including torque application, angular dis...
	Large diameter blasting test machine	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...
	Shoe Sole Bending Tester	Applications： TheFootwear Flection Testeris designed to assess the flexing endurance of overall footwear in wet and dry conditions. Product i...
	HapLog Finger Tactile Sensor	Content HapLog sensor is a “sensor that measures natural finger operations” with a built-in contact force sensor and a 3-axis accele...
	KES-F7 contact heating and cooling tester	Content The sensation of coldness or warmth when skin touches a fabric is referred to as the “coldness and warmth feeling.” The feel...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...