Sliding bearing PV friction testing machine

The testing machine can monitor the changes in friction force and the wear condition of the sample surface in real time during the test, and also precisely control and monitor various parameters of the testing machine in real time.

Application

The sliding bearing PV friction testing machine is primarily used to evaluate the friction and wear performance of engineering plastics, powder metallurgy materials, alloy bearings, and other materials under sliding friction conditions. By simulating different friction conditions, such as variations in load, speed, time, friction pair materials, surface roughness, and hardness, this testing machine can determine the PV value (the product of pressure and velocity, used to represent the load-carrying capacity of sliding bearings), as well as the optimal clearance and lubrication medium.

Standard

GB 7948-1987:Test method for PV limit of plastics bearings

JB/T 7381-2010:Powder metallurgy oil-retaining bearings - Determination of PV value

Working conditions

(1)The tester works normally under the following conditions:

(2)Within the range of room temperature 10℃～35℃.

(3) In an environment where the relative humidity is not greater than 80%.

(4) no vibration around, no corrosive media and no strong electromagnetic interference in the environment;.

(5) The fluctuation range of power supply voltage should not exceed ±10% of the rated voltage, and the fluctuation of frequency should not exceed 2% of the rated frequency; and

(6) Correctly installed on a firm foundation with a levelness of 0.2/1000.

Feature

High-precision testing: Ensures the accuracy of test results through precise control and real-time monitoring.

Wide range of applications: Suitable for various fields, including automotive manufacturing, aerospace, and mechanical engineering.

Multifunctionality: Capable of performing tests under different lubrication and load conditions.

Data processing: Test data can be displayed in real time, and corresponding data curves can be plotted for easy analysis and storage.

User-friendly: The equipment is easy to operate, making it suitable for use in research institutions, universities, and research institutes.

Parameters

Description	Details
Test force (radial) loading range	0 - 15000N
Force value accuracy error	≤ ±1%
Spindle speed	0 - 2000r/min, stepless speed regulation
Maximum speed error	±2r/min
Measuring range of friction torque	0 - 50Nm
Relative error of torque display value	≤ ±2%
Temperature measurement range	Room temperature - 300℃
Spindle taper; Friction sub-diameter; Standard specimen size	1:7; 35mm; 39mm (outer diameter) * 35mm inner diameter * 35mm length
Test time control range	0 - 999999S, arbitrary settings
Radial runout of spindle	≤ ±0.01mm
Test cycle control range	1 - 999999r, arbitrary setting
Control conditions	Fixed speed variable load; set test force, test time (or number of revolutions), test speed, loading interval time, loading gradient, etc. The test machine automatically controls shutdown conditions such as set time, friction coefficient, friction temperature, etc., and shuts down automatically. Real-time display of test parameters during the test process, including test force, friction torque, friction coefficient, number of revolutions, temperature, time, etc. Automatic calculation of test PV value, wear amount, and other data results, and output of test reports
Friction vice (steel bushing)	45# steel quenched and tempered, hardness HRC40 - 45. or customized according to customer requirements
Whole machine power	About 8.5KW
Weight of main machine	About 800KG
Main machine size	About 12006001000 (units not specified, assumed to be mm)

Accessoriess

High-temperature oil reservoir

Room-temperature oil reservoir

Pin-on-disk friction pair

Four-ball friction pair

Thrust ring friction pair

Lifting screw

Chuck pull rod

Spring collet

Vibration damping pads, etc.

Test Procedures

Sample Preparation: Load the sliding bearing sample to be tested onto the test rig, ensuring its surface is clean and smooth.

Load Application: Apply a specific force or pressure to the sample surface using the loading system, simulating the load conditions under real working conditions.

Start of Test: Start the test machine control system, controlling the movement speed of the test rig and the load changes according to preset conditions, and begin simulating the friction and wear process.

Другие товары поставщика

	Electrical bushing flame retardant tester	Product Introduction: The flame retardant test instrument for electrical bushing is used to measure the flame retardant performance of PVC cold fo...
	Scratch tester STD-KK01	Product introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo...
	Industrial water purifier	Standards ASTM D1193(Specifications for Reagent Water) USP <643>(Total Organic Carbon in Pharmaceutical Waters) ISO 3696(Water for Analy...
	Standard light source sample table	Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant...
	Vertical low temperature cold resistance tester	Product description: This machine is used to test finished shoes, rubber, plastic, soles, synthetic leather and other cold resistance degree to un...

Все товары поставщика

Похожие товары

	Thrust Bearing Rolling Friction and Wear Testing Machine	Продавец: Standard International Group (HK) Limited	Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ...
	Falling Sand Abrasion Test machine	Продавец: Standard International Group (HK) Limited	The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
	Conveyor Belt Drum Friction Testing Machine	Продавец: Standard International Group (HK) Limited	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
	Dry Sand Rubber Wheel Wear Tester	Продавец: Standard International Group (HK) Limited	The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
	Sliding Bearing Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...