Bearing Friction Torque Measuring Instrument
Bearing friction torque is an important factor affecting bearing noise, vibration, and lifespan, and is a key indicator for measuring the dynamic performance of bearings.
Application
The bearing friction torque tester is a precision instrument specifically designed for measuring the friction torque of bearings. Its main purposes include, but are not limited to, the following aspects:
Bearing Quality Assessment
By measuring the friction torque of bearings, the quality level of bearings can be evaluated, including their manufacturing precision, material properties, and lubrication effects, etc.
Bearing Optimization Design
Friction torque data is an important basis for bearing optimization design. By testing the friction torque of bearings with different design schemes, their performance can be compared, and thus the best design scheme can be selected.
Standards
GB/T 32562-2016:Rolling bearings - Measuring methods for friction torque
JJF1137-2024:Calibration Specification for Bearing Friction Torque Measuring Instruments
Feature
High-Precision Testing: Utilizes electromagnetic analytical balance technology to achieve high-precision measurement of miniature bearing friction torque.
Multiple Measurement Modes: Supports various measurement modes including real-time, peak, first peak, and average.
Intelligent Monitoring: Features intelligent quality monitoring and rapid calibration functions, allowing for measurement results to be processed on a PC without disassembling the sensor.
Data Storage and Reporting: Automatically stores test data and generates test reports, facilitating user analysis and record-keeping.
Parameters
| Items | Details |
|---|---|
| Test Purpose | Measure the starting friction torque of miniature bearings |
| Test Procedure | Rotate the bearing at 2rpm and measure the maximum, minimum, and average friction torque during 2 weeks of rotation. Draw torque - time curve, torque - rotation angle curve, and rotational speed - time curve |
| Automatic Functions | Automatically analyze and store data, and generate test reports |
| Data Management Functions | Query, playback, and delete test data |
| Torque Measurement Range | 0 ~ 100μN - m |
| Torque Measurement Error | 1μN - m |
| Speed Setting Range | 0 ~ 4rpm |
| Accuracy of Rotational Speed Measurement | 0.5 |
| Working Environment | Inside the ultra - clean room |
| Power Supply | 220V ± 10%, 50Hz ～ 60Hz |
| Working Temperature | 5℃ ~ 35℃ |
| Working Relative Humidity | 5% ~ 85% |
Accessoriess
Torque sensor
Spindle assembly
Bearing clamping mechanism
Drive mechanism, etc.
Test Procedures
Bearing Installation: Install the bearing to be tested on the test equipment, ensuring that the installation is secure and the concentricity error does not exceed ±0.05 mm.
Preloading: Apply the specified axial and radial preload according to the type of bearing and its application.
Starting the Bearing: Start the bearing at the specified speed. After the rotational speed stabilizes (generally no less than 5 minutes), begin the measurement.
Recording Friction Torque Values: During the measurement process, record the friction torque value every 1 minute for 10 consecutive times, and take the average value as the measured friction torque value under this operating condition.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Microbial Barrier Tester | Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting performance of the cont... |
 |
Qinsun UV-master | In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accel... |
 |
Helmets Vertical SpacingInfrared - positioning Tester | Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-20... |
 |
Shoe bending Angle tester丨Shoe bending Angle test mechine | Product Introduction: Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clampe... |
 |
In-situ expansion analysis system | Standard ASTM E83: Standard Test Method for Verification of Linear Displacement Measuring Systems ISO 12417-1: Mechanical Testing of Metals &ndas... |
Похожие товары
 |
Falling Sand Abrasion Test machine | Продавец: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Продавец: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Продавец: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Продавец: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
