Bearing Friction Torque Measuring Instrument
Whats/App: +86 156 1874 6768
Web: standard-groups.com
Bearing friction torque is an important factor affecting bearing noise, vibration, and lifespan, and is a key indicator for measuring the dynamic performance of bearings.
Application
The bearing friction torque tester is a precision instrument specifically designed for measuring the friction torque of bearings. Its main purposes include, but are not limited to, the following aspects:
Bearing Quality Assessment
By measuring the friction torque of bearings, the quality level of bearings can be evaluated, including their manufacturing precision, material properties, and lubrication effects, etc.
Bearing Optimization Design
Friction torque data is an important basis for bearing optimization design. By testing the friction torque of bearings with different design schemes, their performance can be compared, and thus the best design scheme can be selected.
Standards
GB/T 32562-2016:Rolling bearings - Measuring methods for friction torque
JJF1137-2024:Calibration Specification for Bearing Friction Torque Measuring Instruments
Feature
High-Precision Testing: Utilizes electromagnetic analytical balance technology to achieve high-precision measurement of miniature bearing friction torque.
Multiple Measurement Modes: Supports various measurement modes including real-time, peak, first peak, and average.
Intelligent Monitoring: Features intelligent quality monitoring and rapid calibration functions, allowing for measurement results to be processed on a PC without disassembling the sensor.
Data Storage and Reporting: Automatically stores test data and generates test reports, facilitating user analysis and record-keeping.
Parameters
| Items | Details |
|---|---|
| Test Purpose | Measure the starting friction torque of miniature bearings |
| Test Procedure | Rotate the bearing at 2rpm and measure the maximum, minimum, and average friction torque during 2 weeks of rotation. Draw torque - time curve, torque - rotation angle curve, and rotational speed - time curve |
| Automatic Functions | Automatically analyze and store data, and generate test reports |
| Data Management Functions | Query, playback, and delete test data |
| Torque Measurement Range | 0 ~ 100μN - m |
| Torque Measurement Error | 1μN - m |
| Speed Setting Range | 0 ~ 4rpm |
| Accuracy of Rotational Speed Measurement | 0.5 |
| Working Environment | Inside the ultra - clean room |
| Power Supply | 220V ± 10%, 50Hz ～ 60Hz |
| Working Temperature | 5℃ ~ 35℃ |
| Working Relative Humidity | 5% ~ 85% |
Accessoriess
Torque sensor
Spindle assembly
Bearing clamping mechanism
Drive mechanism, etc.
Test Procedures
Bearing Installation: Install the bearing to be tested on the test equipment, ensuring that the installation is secure and the concentricity error does not exceed ±0.05 mm.
Preloading: Apply the specified axial and radial preload according to the type of bearing and its application.
Starting the Bearing: Start the bearing at the specified speed. After the rotational speed stabilizes (generally no less than 5 minutes), begin the measurement.
Recording Friction Torque Values: During the measurement process, record the friction torque value every 1 minute for 10 consecutive times, and take the average value as the measured friction torque value under this operating condition.
在线联系供应商
Other supplier products
 |
Metal Corrosivity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com standards GB/T 15970 ISO 7539 ASTM G31 GB/T 10125 Scope of Application The metal corr... |
 |
Automated Filter Integrity Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Testing Standards ASTM F838 – Membrane bubble point method ASTM D5199 – Gas a... |
 |
Small Parts Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Test Procedure: Usage Methods and Interpretations Applicable standards: ASTM F963 EN 71-... |
 |
Transmission Fluid Friction Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com The Passenger Vehicle Automatic Transmission Fluid Anti-Shudder Friction Tester is a specia... |
 |
In-situ expansion analysis system | The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | 卖方: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
