EVA/POE Film Extrusion Line
JWELL POE/EVA film production line features:
The salivating extruder adopts multi-machine co-extrusion single screw extruder, which can be extruded by EVA and POE layers, ensuring performance and saving cost to a great extent.
Roller body part adopts double-sided embossing.
The cooling part of EVA/POE Film Extrusion adopts cooling unit and stress-relieving cold bed to make the film run smoothly and fully finalize the design to ensure shrinkage rate less than 3%.
The whole EVA/POE Film Extrusion Line adopts PLC automatic control to realize man-machine interface operation. The production line is equipped with online quality monitoring and control system to ensure the qualified rate of products.
The coiling machine is produced by Jwell machine company, the configuration requirements can be adjusted flexibly, which can realize automatic production and save labor cost.
EVA Extrusion Line Performance and Advantages
Performance characteristics of EVA and Poe film production line of Jwell company:
(1) The casting extruder adopts EVA / POE special single screw extrusion, and the screw barrel constant temperature circulating water cooling system solves the technical difficulties of EVA plasticization and non-crosslinking. And it can realize multi machine coextrusion, and the two materials can be used together to ensure the performance and save the cost at the same time.
(2) The roll body adopts double-sided embossing and solves the technical difficulties of adhesive film sticking to the roll.
(3) The cooling part of EVA and Poe film extrusion line adopts cooling roller and stress relief cooling bed to make the rubber film run smoothly and fully set, so as to ensure that the shrinkage rate is less than 3%.
(4) The whole EVA and Poe film extrusion line adopts PLC automatic control to realize the operation of man-machine interface.
(5) The EVA and Poe film production line is equipped with online quality inspection and control system to ensure the product qualification rate.
(6) The patented full-automatic winder can realize the full-automatic production of the whole machine and save labor cost.
JWELL Extrusion Machinery Co. Ltd is a high-tech manufacturer specializing in the research and development of yarn spinning machine, pvc sheet extrusion line.
Другие товары поставщика
|
|
Plastic Compounding Machine |
The twin-screw extruder is composed of a transmission device, a feeding device, a barrel, and a screw, and the functions of each component are simi... |
|
|
Plastic Compounding Machine |
The twin-screw film extruderis composed of a transmission device, a feeding device, a barrel, and a screw, and the functions of each component are ... |
|
|
PVC Sheet Extrusion Line |
PVC Sheet Extrusion Line
The PVC sheet extrusionof Jwell machinery chinais divided into hard sheet and plate, mainly as follows:
There are tw... |
|
|
Plastic Profile Extrusion Line |
This plastic profile extrusion lineconsists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing li... |
|
|
Plate Extrusion |
Plate Extrusion
Plate extruder is one of the screw plastic extruders. The working mechanism of screw plastic film extruderis to rely on the pressu... |
Все товары поставщика
Похожие товары
