Waveguide Isolators

• 

Dolph Microwave offers a standard product line of waveguide isolatorsranging from WR70 to WR 900. For more information feel free to call us and discuss your needs with one of our sales engineers.

Difference Between Circulator and Isolator

A circulator is direct the flow of microwave or radio-frequency signals in RF systems which is normally a 3 or 4-port components. The operational principle is transmits input signal from 1 port to the next, The ports can be as input signal, output signal or termination and generally have a line impedance of 50Ω.

An isolator is a circulator as well but the difference is it has only 2 ports that transfer a signal, while the third port has a termination resistor connecting with ground. It protects RF components from excessive signal reflection. If port A signal is well matched with port B, then the signal to port B lowest loss. If not match, the signal will pass to port C, which will be dissipated into heat. Port A is the input and port B is output.

Difference Between Circulator and Isolator

Application and Clarification of Waveguide Isolator

The isolator in microwave engineeringis a non-reciprocal two-port device that transmits electromagnetic waves in one direction, and the reverse transmission of the signal is isolation, so the isolator is also called an inverter.

In microwave systems, it is mainly used to control the transmission of electromagnetic wave signals in one direction, and at the same time reduce the influence of reflected signals on the system or on the source.

The typical specifications of the full-band isolator are shown in the table above, and the waveguide specifications, flanges, operating frequencies, indicators, etc. Can also be customized according to customers' requirements.

There are many microwave waveguide manufacturers, but we are one of the best choices for you.

Другие товары поставщика

	WAVEGUIDE COMPONENTS	Waveguide Components Dolph Microwave R&D and manufactures various of standard waveguide component, double ridged precision waveguide component...
	Waveguide Probe Coupler	In waveguide probe coupling, a probe inside a coaxial line is used to distribute energy into a waveguide. As current starts flowing in the probe, a...
	Waveguide Attenuators	Dolph Microwave offers different types of waveguide attenuators. Typical Attenuation values are 3dB, 6dB, 10dB, 20dB and 30dB (other attenuation va...
	Motorized Quick Deploy Antenna	Dolph Microwavequick-deploy motorized antenna system manufactured is a relocatable rapid deployment complex with automatic guidance. Incorporates p...
	Waveguide Couplers	Dolph Microwave manufactures Waveguide Directional Couplers covering a wide frequency range from WR2300 to WR10. Couplers are available in 3 or 4 p...

Похожие товары

	Precision Hot Air Oven	Продавец: Guangdong Yuanyao Test Equipment Co.,Ltd.	Model: YPO-072 YPO-270 YPO-480 YPO-600 YPO-720 YPO-1000 Main Parameters: Temperature range: R...
	Nitrogen Drying Oven	Продавец: Guangdong Yuanyao Test Equipment Co.,Ltd.	Nitrogen ovencan provide an anaerobic environment for drying or baking samples. Normally we use c...
	INDUSTRIAL MICROWAVE COMPONENTS	Продавец: Dolph Microwave Co., Ltd.	Dolph Microwave offers a full line of industrial microwave products. Specializing in waveguide co...
	Industrial Microwave Circulator	Продавец: Dolph Microwave Co., Ltd.	Dolph Microwave offers a standard product line of Industrial Microwave Circulator for 915 and 245...
	Flyaway Antenna	Продавец: Dolph Microwave Co., Ltd.	Dolph Microwave Flyaway Antenna System incorporates precision assembled reflector panels with our...