Features
Economic and powerful, high efficient
Compact design, easy installation
No plumb exudation, more safe
Can sustain continual heavy duty work
Low or no maintenance
Whisper quiet operation
Various protection functions
DC power supply or battery is applicable
Billowy flow rate 25LPM at 24V DC is available
Motor
DC brushless motor with energy efficiency technology use MPPT by micro processor, and variable speed & power consumption optional by dial control.Stable & advanced soft-starting function, very low in-rush current, perfect for working directly with PV panel.
Impeller
Highly efficient and dynamically balanced with fine ceramic bearing for smooth ultra quiet operation.
Construction
Wetted parts are food grade stainless steel, food grade thermoplastic (Viton), carbon and ceramic for superior reliability and corrosion resistance.
Over voltage protection
When the voltage over 28V, the pump will auto-protect and shut off own power supply, when the voltage falls below 28V, the pump will restart automatically.
Over load protection function
This means that when the current is over the rated current, such as can arise if the impeller is stuck due
to debris. The pump will automatically stop to prevent damage, and will restart when the current falls again.
PV operated
For solar system loops, the TD5 pump can be powered directly from a PV panel. Thesun comes up, heat builds in the solar hot water panel and at the same time electricity is made in the PV panel.The pump slowly starts with the smallest amount of current and pushes the heated water to the storage tank. It's all too simple and eliminates all controllers, thermostats and sensors.
Soft start-up
The TD5 Solar DC pump has a soft start-up feature which reduces high in-rush current. When the photovoltaic panel provides sufficient power,the pump goes through the alignment phase by turning the rotor into the position required for start-up. The processor then waits until the capacitor is sufficiently charged. This enables a start-up with minimal power (less than two watt).Cycling due to unsuccessful attempts is minimized. Even after prolonged shutdown, the
pump will start reliably .
Automatic polarity protection
Red is plus, black is minus, if wrong polarity will not damage the motor for it has the automatic polarity protection function.
Application
The TD5 solar DC pump can be used for most circulation pump applications without connection to the power grid. Highly efficient, the TD5 can be connected directly to a photovoltaic panel and is characterized by its small size, high efficiency, and extreme low power consumption. The long life brushless motor technology provides maintenance free and quiet service life. This pump is perfect for single family home thermal solar systems or any circulation pump application where conventional power is not available.
Areas of Use:
● Solar Water Heating Systems
● Portable power supplies
● Hot pump air conditioner
● Air energy water heater
● Hot Water Circulation
● Radiant Floor Heating
● Heat Transfer Applications
● Cooling Systems
● Beer Brewing
● Food Liquid Transfer
● Hot water Transfer Pump for Home Brewing
● Portable power supplies
■ Specifications
1 |
Max Flow Rate |
20LPM / 5.3GPM |
2 |
Max Static Lift |
4.5M/14.5' |
3 |
Rated Voltage |
17V |
4 |
Impeller Type |
Half-Closed impeller |
5 |
Power Consumption |
5W 10W 15W 25W |
6 |
Liquid Temperature |
0-110°C |
7 |
Food Grade(Y/N) |
Y |
8 |
Pump Theory |
Centrifugal pump |
9 |
Motor Type |
brushless DC motor |
10 |
Ambient Temperature |
-10-50°C |
11 |
Media |
Pure Water |
12 |
Waterproof Class |
IP42 |
13 |
Use Place |
Indoor |
14 |
Working Voltage Range |
6~24V |
15 |
Noise Class form 1M |
45dB /Max |
16 |
Ideal Life Time |
30000 Hours |
17 |
Working Mode |
Continuous |
18 |
Pipe Connections: |
male 1/2” BSP or male 1/2” NPT |
19 |
Maximum Working Pressure |
10bar (145Psi) |
20 |
Weight |
860 g |
21 |
Power Supply |
DC power supply, battery, solar powered |
22 |
Protection Functions |
Over-voltage protection, overload protection, over-current protection, reverse polarity protection (optional) |
23 |
Remarks |
Can’t dry-running, not Self-priming |
■ Parameter
Pump |
Max Capacities: 20LPM / 5.3GPM |
Max Head: 4.5M/14.5' |
Pipe Connections: male ½” BSP or male ½” NPT |
Maximum Working Pressure: 10bar (145Psi) |
Maximum Temperature: 110°C (230° F) |
Low noise: 45dB far from 1m distance |
Weight less than 2lbs. |
Motor |
DC brushless motor with energy efficiency technology |
Voltage: 6V-24V DC (main:17V DC) |
5W, 10W, 15W, 25W power consumption optional |
Dry-running protection |
Overload Protection |
Over voltage Protection |
Automatic polarity protection |
Wetted Parts Materials:
Pump Head |
Pump Chamber |
“O” Ring |
Impeller |
Shaft |
Bearing |
Washer |
Stainless steel |
Stainless steel |
Silicon Rubber |
PPE |
Fine Ceramic |
Graphite |
Fine Ceramic |
Remarks: All wetted materials is food grade, temperature resistance above 110 °C |
■ Curve & Dimension
Dimension: