.

Automatic Tape Dispenser

  • M-1000 Automatic tape dispenser

    * Tape Width: 7 ~ 50mm
    * Cut Length: 5 ~ 999mm, Digital Length Adjustment.
    * Length setting: Digital
    * Accuracy of cut: +/-1mm
    * Counter Up or Down: Optional
    * Tape Material: 100+ tape materials can be cut
  • BJ-2000S Packaging Tape Dispenser

    * Tape Width: 5mm ~ 50mm
    * Cut length: 5mm ~999mm
    * Accuracy of cut: +/- 1mm
    * Display: 3 digit LED
    * Length setting: Digital
    * Counter up or down: optional
  • ZCUT-2 Vinyl Tape Dispenser

    * Available Tape Width: 3 ~ 25mm
    * Available Cut Length: 13 ~ 60mm
    * Adjusting Method: Screw
    * Bobbin: Needed
    * Body Material: Plastic
    * Measurement & Gross Weight: 300×170×165mm 2.8kg
  • ED-100 Automated Tape Dispenser

    * Acceptable Tape Width: 7mm ~ 50mm
    * Cut Length: 15mm ~ 999mm
    * Display: 3 digit LED
    * Blades good for up to over 200,000 cuts (dependent on type of material)
    * Accuracy of cut length is +/– 1mm (dependent on type of material)
  • M-1000S Narrow Tape Dispenser for 5mm

    * Available Width: 5 ~ 50mm
    * Available Length: 5 ~ 999mm
    * Display: 3 digit LED
    * Power Supply: AC110V 60Hz / AC220V 50Hz 18W
    * Measurement & Weight: 218×137×150mm 3.5KG
  • RT-3000 PP Tape Dispenser

    * Available Width: 3 ~ 25mm
    * Available Length: 9 ~ 61mm
    * Power Supply: AC110V 60Hz / AC220V 50Hz
    * Measurement & Weight: 150*120*250mm 2.2Kg
  • ELM-1000 Automatic Tape Dispenser

    * Acceptable Tape Width: 7-50mm
    * Available Cut Length: 20-999mm
    * Cut Accuracy: +/-1mm
    * Counter Up or Down: Optional
    * Industry Served: Food, Beverage, Commodity, Medical, Chemical, Machinery & Hardware, Apparel, Automotives, Electric & Electronics, etc.
  • MS-1100 Electronic Tape Dispenser

    * Suitable for adhesive tape.
    * Accepts width: 7-50mm
    * Adjustable tape length: 30-999mm (1mm intervals)
    * Max outside diameter: 180mm
  • TDA-080 Heavy Duty Tape Dispenser

    * Width: 13-80mm
    * Tape Size Set Limit: 40 – 9999mm
    * Free Max. OD of Roll: 230mm
    * Core Diameter: 3″ (76.2mm)
    * Accuracy: ± 1mm
    * Power supply: AC110V 60Hz / AC220V 50Hz
  • BP-333 Gummed Paper Tape Dispenser

    * Available Width: 38 ~ 76mm
    * Max. OD of tape roll: 178mm
    * Blades: Guillotine sheer blades
    * Water Brushes: 2 for consistent, uniform tape wetting
    * Water Bottle Capacity: 41 ounces (1.2 liters)
  • F-1B Kraft Tape Dispenser

    * Available width: 15-110mm, length: 50-1100mm
    * Water Brushes: 2 for consistent, uniform tape wetting
    * Water Bottle Capacity: 41 ounces (1.2 liters)
    * Electrical Requirements: None (optional Top Heater requires electrical power)
  • BJ-P2 L-Clip Box Sealing Machine

    * Origin:Japan
    * Tape width: 12mm, 15mm, 18mm, 24mm
    * Speed: 15~40 boxes/min
    * Hole size: 20~50mm(±1~2mm)
    * Scope of application: PP tape, PET cloth tape, Glass cloth tape, and so on.
  • «
  • 1
  • 2
  • »

The working principle of tape dispenser:

The tape dispenser is also called a belt cutter. It is mainly used to cut the tape up and down the blade, according to the length of the customer's needs, set the length and cut it. Tape cutting machine has sensors. The tape will drop is at the top of the sensor after being cut. If the tape is removed, the sensor will automatically immediately send a signal to no tape and will move to the next phase of the cutting. Such a process is repeated continuously, called automatic and continuous cutting.

Generally, tape dispenser has the following characteristics:

1. Tape dispenser can cut tape, adhesive paper, protective film and other materials.
2. It can hold two rolls of adhesive tape at the same time and work simultaneously.
3. The tape dispenser has the memory function. Turned on after shutdown, the original data is still saved.
4. With the function of circular shearing, it is free to set different length cycle shear and tape cutting function to cut the adhesive paper with different thickness.
5. The tape dispenser is safe, with its screen in the cutter. Once the machine is blocked, warning devices work automatically and even if the blockage is removed, the machine will not work immediately, so you must press the start key again after back to work.
6. The tape dispenser is usually designed without a roller.

The use of tape dispenser is divided into the following steps:

1. Turn off the power switch, and then open the safety cover to reach the manual rocker arm to move the frame arm.
2. Adjust the blade until the blade is clamped to the rotary disc.
3. Then remove the frame arm from the rotating disk.
4. Then pass the tape through the blade and stick it to the rotating disk.
Note: keep it in the middle of the adhesive tape and stick it to the rotating disc.
5. If you can't install the tape properly, you can repeat the steps of 1-4 to continue to install the tape dispenser.


Отправить запрос, связаться с поставщиком

Кому: KUNSHAN BOJIN TRADING CO.,LTD.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

Wire Stripping & Cutting Machine
Wire Stripping & Cutting Machine Fully computer-controlled wire operation procedure This procedure is about the fully computer-controlled wire stripping & cutting machine op...
M-1000 Automatic tape dispenser
M-1000 Automatic tape dispenser Operation Video Benefits ofAutomatic tape dispenser M-1000 Ideal for medium production facilities in many industries; Auto Mode & Manual...
BJ-506 Wire Cable Bundler Machine
BJ-506 Wire Cable Bundler Machine Specification ofBJ-506 Wire Cable Bundler Machine Model: BJ-506 Available bind wire Length: 220mm—350mm Available binding wire diamete...
BJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine
BJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine Technical parameters ofBJ-3000F Full-automatic Wire Strip & Terminal Crimp Machine Type Automaticcomputersingleheadterminalcrimpingmach...
Pneumatic Wire Stripping Machine
Pneumatic Wire Stripping Machine Pneumatic Wire Stripping Machine BJ-0320 Magnetic Pneumatic Wire Stripping Machine * Cable cross section: 0.03 – 2.08 mm² (3...
Все товары поставщика

Похожие товары

Horizontal Machining Center
Horizontal Machining Center Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ...
Horizontal Lathe
Horizontal Lathe Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. As a professional horizontal lathe manufacturerand horizontal lathe factory, Sealion Machine Tool...
Gantry Machining Center
Gantry Machining Center Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. SEALION supplies Gantry Machining Center both tables moving type or gantry moving type. Gantry ty...
Floor Type Boring Mill
Floor Type Boring Mill Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. Floor Type Boring Mill is suitable for large size jobs to do milling, boring, drilling, etc. The ...
Flat Bed CNC Lathe
Flat Bed CNC Lathe Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. China flat bed cnc lathecan turn large axle parts and disc parts with various kinds of threads, a...