2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system
What is the difference between 2K AB adhesive materials manual potting machine and robot pottingmachine ?
- Vacuum material-feedingsystemor diaphragm pump feeding system
- High precision pump metering system
- Dynamic/Static mixing system
- Three-axis motion system
- Programming control system.
AB-componentmaterialsflows into the pump through the feedingsystem (AB tanks) separately by the self-suction force of the metering pump.
- Vacuum material-feedingsystem
- High precision pump metering system
- Dynamic/Static mixing system
- Manual dispensing by glue gun or pedal .
AB-componentmaterialsflows into the pump through the feedingsystem (AB tanks) separately by the self-suction force of the metering pump.
Strong versatility/Multiple configuration/High production capacity/High precision
- Auto feeding :take use of vacuum pressure to feed materials into A&B tank separately.
- Tank Stirring :A and B tank configure with stirring motors and blades to prevent material sediment in the tank bottom .
- Heating :Tank , pipe , pumps are optional with heaters to assure the whole system can be heating from room temperature to 90°C adjustable.
- Vacuum :A &B tank vacuum for degas the bubble inside material .
- Dynamic mixing :Configuring dynamic motor and mixer to mix A and B fluids evenly.
Advantages:
1,Accuratedmetering and even mixing helps to avoid the waste ofmaterial.
2,Dispensingvolumeand positioning keep machine work consistent and fast.
3,Good universality
4,Easy to program and operate.
5,Tally function, non-standard mode, primer mode, level alert, filter mode, liquid display device, preventing back-flow device and other functional device.
- Applications:
Transformer , capacitance , power module , regulating plate ,protection module , generator , pressure package , soli relay ,fault indicator , Sensors , junction box , clutch , wave filter , water meter , boattery cover , rectifier and so on ...
1Kand 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials.
Two component potting materials ,2-partcompound materials,AB partcompound materials,2Ksilicones,2Kepoxiesresin,Bi-componentPU,Ployerster,Polyurethane,UV materialsand so on .
Machine description and working principle
Compound materialsA & B are kept in two tanks separately. There are two sets of metering pumps inside the machinefor metering A and B resin by setting ratio, draining outmaterialindividually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
2 K Dispensing 2 Component DOS Automatic Ab Glue Epoxy Dispensing Application Machine Glue Potting Machine Mixer | Information about Meter Mixing/Dispensing Machines for 2-Part Polyurethane Casting Resins Two-part polyurethane casting resin systems may be proce... |
 |
Автоматическая установка смешивания и дозирования | Применение:Заливка, герметизация светодиодных изделий: LED- дисплеев, уличных LED-светильников, грунтовых LED-светильников и других.Залив... |
 |
Cantilever-type glue MGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide Structural Insulated Panel | Cantilever-typeglueMGO SIP Panel laminating line for XPS Insulation Board/Magnesium Oxide StructuralInsulated Panel The glue Spraying line is ba... |
 |
Дозирующие машины для литья и нанесения заливочных двухкомпонентных полиуретановых и прочих компаундов холодного отверждения. | Дозирующие машины для литья и нанесения заливочных двухкомпонентных полиуретановых и прочих компаундов холодного отверждения. Компания KPD предлаг... |
 |
Роботизированная 3-осевая консольная конвейерная линия для заливки клеем AB Линия по производству ленточных роликов | Автоматическая дозирующая система Дозирование герметика на LED-лампы, нанесения силиконовых прокладок. Установка предназначена для смешивания... |
Похожие товары
 |
The Ultimate Tool for Bubble-Free Displays | Продавец: Shenzhen Wikshu Technology Co. | FORWARD FW-16R Bubble Remover и FW-8R Mini Bubble Removal Machine удаляют пузырьки OCA с экрана в... |
 |
Precision CNC Lathe With Conjoined Oblique Rail Cutter Tower | Продавец: Zhejiang Guoyu CNC Machine Tool Co., Ltd. | Technical Characteristics: 45° slant bed base structure, with strict aging treatment, smooth ... |
 |
Rail Welder A Frame aligners railway welding tools | Продавец: 834406 | 产品描述 A型车架 A-Frame 是一种导轨对准器，可精确对准要焊接的导轨。该设备在焊接操作期间将导轨固定到位。 |
|
|
2 parts fluid mixing dispenser 2 component dosing epoxy PU silicon rubber vacuum system | Продавец: 824681 | What is the difference between 2K AB adhesive materials manual potting machine and robot pottingm... |
 |
Horizontal Machining Center | Продавец: Xilong (Shanghai) Machine Tool Co., Ltd. | Horizontal Machining Center parts can automatically finish four sides milling, boring, drilling, ... |
