Forging Process
Create Die Mold
Create a die mold is the first step for the metal forging process, it is critical and essential step for the die mold forging process.
We have a die mold maker who had been working with us for near 20 years, with rich experience, who can design the mold according to customers’ drawings, samples very quickly and with very high quality.
Material Cutting and Heating
Material Cutting and Heating
Base on the drawings or samples, our engineers will calculate the bar material diameter and length we need, then we will select the correct bar material and cut it in suitable billets.
The billets will be sent to the high frequency furnace for hearting to about 1000°C, then start the press.
Press
Press
The heated billet with 1000° C will be put at the middle of the dies, close the dies, the material will be shaped as the customers requirement. When open the dies, we get a raw parts with the fin around.
Cutting the Fin
Cutting the Fin
The raw parts with the fin will put in a cutting mold to remove the fin, after the fin removed, we get the raw forgings, the forging process is completely.
Heating Treatment
Heating Treatment
To get better strength or machining hardness, eliminate forging stress and improve metal cutting performance. we need put the forging in heat treatment furnace. Heat the parts near or above its critical temperature, held for a certain time, then cooling the metal in some medium like air, water or molten salts.
The hot forging processincludes annealing, case hardening, tempering, normalizing and quenching, nitriding, cyaniding etc.
Sand Blasting
Sand Blasting
To remove the oxide layer of the forging and get a uniformed surface, we will place the parts in sand blast machine. After sand blasting, the surface is quite uniform.
Machining
Machining
To get accurate dimensions, the machining process is needed. In my factory, with more than 40set machining, we can machine the forgings in turning, drilling, milling, grinding, that means, you just need provide the drawings or samples, we will make finished parts according to your request.
Quality Inspection
Quality Inspection
Every parts in my factory must be inspected the quality before leading to my customers. This is very important to process, we have various inspection tools and experienced inspectors in my factory. The defected parts is not allowed to ship to any customer.
Packing
Packing
We are experienced in export package, we will follow customers request to pack the parts, the plywood box or carton, pallets all available.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
BM2 Hydraulic Spool Valve Motor | What is BM2 Hydraulic Spool Valve Motor? BM2 motor is a spool valve type motor. Characteristic Features of BM2 Hydraulic Spool Valve Motor: 1,... | |
Sanitation Vehicle Cylinders | Brief introduction: Sanitation vehicle cylinders are widely used in various types of compressed sanitation garbage truck hydraulic systems. The se... | |
Hydraulic Cylinder Forgings | hydraulic cylinder accessories, hydraulic cylinder components Hydraulic Cylinder Forgings Hydraulic cylinder is a lot of hydraulic cylinder par... | |
Forged Trunnion | Forged Trunnion Product: forged trunnion Application: hydraulic cylinder, truck Place of origin: Hebei, China (Mainland) Material: C45, 2... | |
Forklift Series Cylinders | Forklift Series Cylinders What is Forklift Series Cylinder? The forklift hydraulic lift cylinder include tilt cylinders, lift cylinders, steering c... |
Похожие товары
Cassava Grater Machine(Cassava Grinding Machine) | Продавец: Nanyang Goodway Machinery & Equipment Co., Ltd. | Features of Cassava Grater Machine(Cassava Grinding Machine) Processing Capacity: 3-6Tons/hour ... | |
The 24th China(Guangzhou) Int’l Forging Industry Exhibition | Продавец: GUANGZHOU JULANG EXHIBITION DESIGN CO., LTD | 2025 China (Guangzhou) Int’l Metal & Metallurgy Exhibition The 25thChina(Guangzhou) In... | |
electric pipe grooving machine | Продавец: Hangzhou Evershining Machinery Co.,Ltd | Model: GC-12B Pipe Capacity:2”-12”(¢50 mm - ¢300 mm) Max wall thickness:6 mm Outpu... | |
Forged Clevis | Продавец: Hebei Golden-hammer forgings co., ltd | Product: Forged clevis Application: hydraulic cylinder Place of origin: Hebei, China (Mainl... | |
CNC Turning Shaft - CNC Turning Parts - CNC Turning Service | Продавец: Asianstar CNC Machining Company | Turning Shaft is one the most common CNC turning parts. It is made of metal or plastic materials ... |