.

drill pipe of rotary excavator

drill pipe of rotary excavator

Correct cleaning method for drill pipe of rotary excavator shared by.

When cleaning the drill pipe of rotary excavator, the reason of sediment at the bottom of the hole should be understood firstly.

  1. returns the second footage too large, loaded too full, muck extrudes from the drain hole of the top cover.

According to the characteristics of rotary drilling rig, we have worked out two kinds of hole clearing methods and obtained good results.

At the same time, we can also by changing the proportion of sludge and mud soil and increase or decrease the viscosity of the slurry to control the speed of soil sludge settling velocity, for example, we try to reduce the soil sludge settling velocity, the preparation should be adapted to increase the density and viscosity mud, on the contrary, we can reduce the density and viscosity to speed up the settlement of soil slag rotating drill.

Hole bottom sediment can't standard to do, so we must develop a hole cleaning, otherwise the large amount of settlement of pile top and bearing limit value is reduced, rotating drill hole cleaning settlement and displacement method, commonly used method is the so-called sedimentation method, after the end hole for soil slag precipitation to the bottom of the hole to hole cleaning, and replacement method is in the final hole on the bottom of the hole cleaning, immediately after the residue in soil has not been deposited from the mud before the hole with a new configuration of mud mud displacement in a way outside the hole.

And reverse circulation drilling, for use in pulp hole cleaning is appropriate, because it can take advantage of itself of the rotatingto carry on the positive and negative circulation in pulp, and spin dig with drill pipe does not transfer the function of the circulating fluid, want to use the method of black hole, also need to make pipe and the corresponding rotating drill equipment, this is obviously not feasible, and the settlement method is often used catheter suction pump, air lifting method, method of submersible slurry pump.

There are also some problems in the use of these methods, mainly the influence range of slag suction mouth. When the aperture is 1.5 meters, if the position of slag suction mouth cannot be moved or there is no tool agitation at the bottom of the hole, it is difficult to remove the slag away from the radius.



Отправить запрос, связаться с поставщиком

Кому: Found Petroleum Equipment Co., Ltd.
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

API grade d sucker rod
API grade d sucker rod Grade D Sucker Rodwith chinese manufactuer API grade d sucker rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from C...
Sucker Rod Coupling Class T
Sucker Rod Coupling Class T Sucker Rod CouplingClass T Our company producedClass T Coupling,subcouplingand spray coupling, they are design according to API Spec 11 Bstandard....
high strength sucker rod for sale
high strength sucker rod for sale for sale Oil drilling engineering shares that using oil drilling equipment from the ground along the orbit design drill wear many strata in purpose...
 oilfield drill pipe
oilfield drill pipe oilfield drill pipe Drill pipe plays a decisive role in the process of drilling, it transfered the drilling torque to drill bit, inordertodrilling...
high strength sucker rod
high strength sucker rod Grade HY Sucker Rod Grade HY Sucker Rod Description If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the pr...
Все товары поставщика

Похожие товары

Пластина мембранного фильтра
Пластина мембранного фильтра Продавец: HEBEI POWER MACHINERY PARTS CO.,LTD 1. Отличия от материала: фильтровальная пластина фильтр-пресса разделена на полипропиленовую филь...
Производство долот Tricone 406,4 мм tci IADC537
Производство долот Tricone 406,4 мм tci IADC537 Продавец: Hebei Yichuan Drilling Equipment Manufacturing Co., Ltd. Основной параметрРазмер бит 16 дюймов (406,4 мм)Код IADC 537Соединение 7 5/8 "API reg pinСкорость...
Пластины кулачковых патронов из карбида вольфрама в качестве захвата
Пластины кулачковых патронов из карбида вольфрама в качестве захвата Продавец: Компания Zhuzhou Hongtong Tungsten Carbide Limited ограничена Пластины кулачковых патронов из карбида вольфрама в качестве захвата Поскольку материал карбида ...
api 4 1/2 стальные коронки всех типов трехгранные сверла с открытым центром 8 3/4
api 4 1/2 "стальные коронки всех типов трехгранные сверла с открытым центром 8 3/4" Продавец: Hebei Yichuan Drilling Equipment Manufacturing Co., Ltd. Основной параметрРазмер бита 8 3/4 дюйма (222 мм)Код IADC 127Тип зуба Стальной / Фрезерованный зу...
16-дюймовые трехгранные сверла IADC 537 tci
16-дюймовые трехгранные сверла IADC 537 tci Продавец: Hebei Yichuan Drilling Equipment Manufacturing Co., Ltd. Основной параметрРазмер бит 16 дюймов (406,4 мм)Код IADC 537Соединение 7 5/8 "API reg pinСкорость...