Преобразователи давления
Introduction The principle is that a fluid flowing past a heated temperature sensor removes a known quantity of heat as it passes.In a thermal flowmeter, the fluid has to pass two temperature sensors.One sensor obtains a reference value by measuring the actual process temperature. The second sensor is a heating element and it receives precisely as much energy as is needed to compensate for dispersed heat and maintain a precisely defined temperature difference. The higher the mass flow past the heated temperature sensor, the more heat is dissipated and the more power has to be input to the element to maintain the temperature difference. Heating current, therefore, is a measure of the mass flow of the gas. Application Oxygen, nitrogen, hydrogen, chlorine and mixed gas blast furnace gas, flue gas, biogas, compressed air, natural gas, liquefied gas, primary and secondary air and etc. Features 1. Measure mass flow , no need for humidity and pressure compensation. 2. Large rangeability, flow velocity: 0.1 Nm/s~100Nm/s. 3. No pressure drops, applicable to any section pipe. 4. Anti-corrosion, applicable to corrosive gas. 5. Online installation and maintenance. 6. Measures mass flow directly - without additional pressure and temperature inputs 7. Accurate measurement and operation at very low gas pressures and flow rates 8. Negligible pressure drop
Другие товары поставщика
|
|
Электромагнитный расходомер |
A common flow meter (like a differential pressure and positive displacement flow meters) is themagnetic flow meter, also technically anelectromagne... |
|
|
Преобразователи давления |
Introduction The principle is that a fluid flowing past a heated temperature sensor removes a known quantity of heat as it passes.In a thermal flow... |
|
|
ультразвуковой дебитомер |
JC-3000B flowmeter can be virtually applied to a wide range of long-term measurement . Convertor protection class IP67 , transducer protection clas... |
|
|
JC010 Thermal gas mass flowmeter |
Introduction The principle is that a fluid flowing past a heated temperature sensor removes a known quantity of heat as it passes.In a thermal flow... |
|
|
Водоворот расходомер |
APPLICATION & FEATURES
JC-080 series smart vortex flowmeter is mainly used for measuring flow of industrial pipeline fluid, such as gas, ... |
Все товары поставщика
Похожие товары
